Manufacturer,4pcs Remote Control Light Switch AC 110V - 220V  With RF 433mhz Wireless Controller For Home Automation

Packing List

4 X RF switch Receivers (with shell)

1 X 4-KEY remote control (build-in a 23A/12V battery)

Product Introduction:

1 Working voltage: AC 110V-220V  Load: 10A

2  L Port:  AC 220V Positive;  N Port: AC 220V negative

CK=normally open, COM=common, CB=normally close

3 Working mode: passive output, output no voltage, commonly used as switch

4 Working Indication: LED D1 light (Signal indicator light)

5 Signal Receive mode: Learning mode (nearly all the 433mhz transmitter is OK)  

6 Frequency: 433mhz

7 Receiver Distance: 20-200m ( Signal can be through wall)

8 Working Mode: Support inching(Jog) control, Self-lock control and interlock control as you like.

9 Working Indication: LED D1 light (Signal indicator light)

10 Relay Diamension: 67*33*23 mm(with shell)

11 Remote Transmitter battery: A 23A/12V battery

How to set learning module?

1 Learn Remote Signal

Step 1: Supply power to the module,

Step 2: press the “learning button” once time, the indicator light will flash 1 time,

Step 3: press the RF remote that you need to learn. You will see the LED light flash 3  times, OK.

Now you can use remote to work with module.

2 Clear Remote Signal 

Step 1: Supply power to the module,

Step 2: keep pressing the “learning button”, When you see the LED light flash 3 times, OK. 

How to change the working mode?

1 Momentary: 

Step 1: Keep pressing the “learning button”

Step 2: Supply power to the module, after you see the LED light flash 4 times, then release the “learning button”.  OK

(Keep pressing remote button A, receiver CH1 ON. release button A, then receiver CH1 OFF.)

2 Self-lock: 

Step 1: Keep pressing “learning button”

Step 2: Supply power to the module, after you see the LED light flash 3 times, then release “learning button”.  OK

(Press remote button A , receiver CH1 ON. press button A again, then receiver CH1 OFF)

3 Interlock:

Step 1: Keep pressing the “learning button”

Step 2: Supply power to the module, after you see the LED light flash 2 times, then release  “learning button”.  OK

( Press remote button A, receiver CH1 ON, and receiver CH2 OFF)

Payment

There are many payment methods available,Terms of payment allowed to be made by Escrow, Visa, MasterCard, Moneybookers, Western Union, Bank Transfer and so on.
You can choose a method which is the most convenient for you. To protect your interests, your payment will be temporarily held by Aliexpress, and will not be released to us until you receive your order and are satisfied with it.
if you do not know how to pay the money,
please see this link:http://help.aliexpress.com/payment_method.html

Warranty&Return Policy
1 All item Comes with Basic 3 Month Sellers Warranty,if item defective in 3 Month,We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
2 If item Defective after 3 Month,Buyers can still send it back,We will contact suppliers or manufacturer for Warranty.Buyers Might Need pay the Shipping fee For resend the replaced item.
3 If you want to exchange the items received, you must contact us within 3 days of the receipt of your order. And you should pay the additional shipping fees incurred and the items returned should be kept in their original status.

Feedback
Since your feedback is very important to our business`s development, we sincerely iinvite you to leave 5-star and positive feedback for us if you are satisfied with our product and service.