| Item Type: | Switches |
|---|---|
| Brand Name: | MITI |
| Remote Distance: | 0-500m |
| Warranty: | 1 |
| Certification: | CCC |
| Switch Type: | Remote Control |
| Material: | Plastic |
| Unit Type: | piece |
| Package Size: | 20cm x 20cm x 10cm (7.87in x 7.87in x 3.94in) |
| Package Weight: | 0.2kg (0.44lb.) |
Quick Details
Specifications
9V/12V/24V Electric Wireless Remote Controller Remote Control Switch Receiver & Wall Transmitter garage door / window / Lamp
Specification:
1.Transmitter
Channel: 2 CH
Remote Control Distance: 0-200m
(Please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-50% with the block and signal interference.)
Encode: Fixed code, soldering 2260 2262
Frequency: 315/433Mhz
Power Supply:
12V 27A
Battery
(NOT Include)
2.Receiver
Channel: 1 CH
Power Supply (Operating Voltage): DC 9V/12V/24V
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC
Sensitivity: -105 dBm
Operating Temperature: -40‘C ~ 80’C
Size: 55*24*17mm
Control Mode:
Toggle/Self-Lock: Press->On; Press again->Off
Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
Latched/Inter-Lock: Press->On; Press other button->Off
Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
Learning and removing method:
1. There is a learning button on the control panel of touch switch, the button is used to learn and remove the code.
2. Press the learning button for one time, the indicator light turns on to off. Press any key on the remote controller, the indicator flashes two times and off. It means you learn it successfully.
3. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote controller.
4. Delete remote control method: Keep pressing the learning button for about 8 seconds, the indicator light turns on to off, then the code you learned before will be deleted.
Packing list:
1 x 1CH Receivers
1 x 2CH Transmitter (Battery not include)
