| Item Type: | Switches |
|---|---|
| Brand Name: | Abytele |
| Remote Distance: | 100m |
| Model Number: | 1CH |
| Warranty: | 1 Year |
| Certification: | CCC |
| Switch Type: | Remote Control |
| Features: | wireless |
| Material: | Plastic |
| Unit Type: | Set |
| Package Size: | 20cm x 10cm x 2cm (7.87in x 3.94in x 0.79in) |
| Package Weight: | 0.1kg (0.22lb.) |
Quick Details
Specifications
Specifications:
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
1.Transmitter
It is a panel 86 wall transmitter that can be stuck anywhere. It is a learning code transmitter EV1527 IC Chip. It can be learned into most of the learning code receiver, it can work with any kind learning code receiver in our store.
Channel: 1CH
Remote Control Distance:0-100m
Encode: EV1527
Frequency:315 or 433.92
Current:20-25ma
Power Supply: 12V 27A Battery (NOT included)
2.Control Mode
1)Toggle/Self-Lock: Press->On; Press again->Off
Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2)Latched/Inter-Lock: Press->On; Press other button->Off
Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3)Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
(Original Setting is Toggle , Change it by yourself.)
Power Supply (Operating Voltage): AC 220V
Relay: 20A/14VDC 20A 125VAC
Work Voltage Range of Relay: AC 220V-240V
Sensitivity:-105 dBm
Operating Temperature:-10‘C ~ 60’C
Size:32 mm x 30 mm x 20 mm
Frequency:315 / 433.92 MHZ
3.Package Included
0/1 x Receiver (with cover)
1/2/3 x Transmitter (no battery inside)
4.Learn code and Remove Code
Learning Method:
Press the learning button 3 seconds, the indicator light off .then you press any buttons of the remote control to transmitter signal . it means studying successfully when the indicator flash 3 times until the indicator light on.
Remove code:
press the learning button about 8 seconds , the indicator turn on to off to on , it means the codes have been removed successfully .
