Item Type: | Switches |
---|---|
Model Number: | ZK2DC |
Remote Distance: | 10-150M |
Warranty: | 1 |
Features: | high quality |
Certification: | CCC |
Brand Name: | CENTURY AOKE |
Switch Type: | Remote Control |
Material: | Plastic |
Frequency: | 315/433MHZ |
Encoding type: | Learning Code |
Max. Voltage: | 12V |
Max. Current: | 10A |
Unit Type: | Set |
Package Size: | 15cm x 13cm x 11cm (5.91in x 5.12in x 4.33in) |
Package Weight: | 0.3kg (0.66lb.) |
Quick Details
Specifications
Features/ Application:
- High confidentiality, large storage , stable performance and dispensing with traditional jumpers or switches coding, just wireless remote control will be fired the receiving signal controller, make this controller receive and store the signal from remote control.
- Apply in many kinds of wireless devices – including hand-held and portable units, window/door transmitters and a variety of detectors and other devices.
- Commonly used to control those wireless products in family, office, hotel, hospital, shopping malls, warehouse etc.
1, Operating voltage | DC12V |
2, Operating frequency | 315/ 433.92 MHz |
3, Frequency deviation | ± 0.2MHz |
4, Operating temperature | -40’C ~ +80’C |
5, Receiving sensitivity | 108dBm |
6, Modulation | AM |
7, Signal output method | L4:Latch-signal,M4:Momentary-signal,T4:Toggle-signal |
8, Decoder chip | fixed code (PT2272/ PT2262/PT2264/SC2262 ),learning code(EV1527), |
9, Size (L*W*H) | 68*48*16.8mm |
Learning method:
A: Momentary-----------press the learning button (1CH) 1 time ,the LED indicator flash then press the transmitter button A , until the LED indicator stop ,it mean button A learning successfully. 2CH the same as 1CH.
B: Toggle------------press the learning button 3 times ,the LED indicator flash then press the transmitter button A, until the LED indicator stop ,it mean button A learning successfully. 2CH the same as 1CH.
C: Latched------------- press the learning button 2 times ,the LED indicator flash then press the transmitter button A, until the LED indicator stop ,it mean button A learning successfully. 2CH the same as 1CH.
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF,
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF,
Latched------------Press transmitter button A, the receiver relay A is ON, Press transmitter button B, the relay A OFF. The relay B is ON .
Clearing Code
Keeping press the Learning Button on the receiver until the LED indicator OFF, it mean the code have been cleared successfully.
- 1x Receiver Board
- 1x Remote Controller