| Item Type: | Switches |
|---|---|
| Brand Name: | YurKuong |
| Remote Distance: | -107dBm |
| Model Number: | YK-12R01M |
| Features: | NO COM NC |
| Warranty: | 1 |
| Switch Type: | Remote Control |
| Certification: | QC |
| Unit Type: | piece |
| Package Size: | 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) |
| Package Weight: | 0.1kg (0.22lb.) |
Quick Details
Specifications
Here is only Receiver for Professional,
without the transmitter
Here is only Receiver without the Transmitter
First of all, you must make sure your own transmitter frequency is 315MHZ or 433.92MHZ
what is the IC Chip Number
our receiver is learning code, it can learn most of Fixed Code and Learning Code Transmitter,
IC Chip like this (2262 2264 2260 2240 1527 etc)
it can not work with rolling code transmitter
Please leave us massage to tell us you need it
315MHZ or 433.92MHZ Momentary or oggle or Latched
DC12V 1CH Receiver Board
1.Working Voltage: DC12V more or less than 10%
2.Current:Standby less than 10mA,Working less than 128mA
3.Working Temperature: -10 'C—+60'C
4.Receiver Frequency: 315MHz/433MHZ
5.Receiving Sensitivity: -105dB
6.Output State: Switching Value/ DC12V
7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A
8.Receiver Board Size:55×31×16mm
9.Case Size:34×26×15mm
Learning Code: Add transmitter by the Learning Button on the receiver
Output State: It is adjusted by different Dot on the Receiver Board,
Momentary---------- Connect "M & the Below Dot "
Toggle----------------Connect "T & the Below Dot "
Latched--------------No Connection
Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF,
Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF,
Latched------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF
Learning Method
Input DC12V for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully.
Clearing Code
Press the Learning Button and hold on the receiver until the LED indicator ON and wait for 5s until the LED Indicator OFF, then Release your finger, 5s later the LED Indicator will ON again, and 1s later OFF ,it mean the code have been cleared successfully.
