wireless relay 220v remote control switch,10A Relay 1CH Wireless RF Remote Control Switch 1 Transmitter+1 Receiver SKU: 5043

  We have 110 v, if you need, please let us know, we send the default 220 v, thank you

Specification:

 

1.Transmitter

Channel: 2 CH

Remote Control Distance: 50m/150ft

(Please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-50% with the block and signal interference.)

Encode: Fixed code, soldering 2260 2262

Frequency: 315/433Mhz (Default 315MHz)

Power Supply: 1 X 12V/23A battery (NOT Include)

 

 

2.Receiver

Power Supply (Operating Voltage): AC 220V

Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC 

Work Voltage Range of Relay: AC 110-240V or DC 0-28V

Sensitivity:-105 dBm

Operating Temperature:-10‘C ~ 60’C

 

 

Control Mode:

Latched/Inter-Lock:   Press->On; Press other button->Off

Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).

 

Learning and removing method:

1. There is a learning button on the control panel of touch switch, the button is used to learn and remove the code.      

2. Press the learning button for one time, the indicator light turns on to off.  Press any key on the remote controller, the indicator flashes two times and off. It means you learn it successfully.

3. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote controller.

4. Delete remote control method: Keep pressing the learning button for about 8 seconds, the indicator light turns on to off, then the code you learned before will be deleted.

 

Note:We default send 315Mhz, if you need 433Mhz, pls leave a message under your order, thanks!

 

Packing list:

1 x Receiver

1 x Transmitter (Battery not include)