| Item Type: | Switches |
|---|---|
| Remote Distance: | -110dBm |
| Certification: | CCC |
| Brand Name: | YurKuong |
| Features: | 2CH Learning Independently |
| Switch Type: | Remote Control |
| Warranty: | 1 |
| Model Number: | DC12V 2CHM RX only |
| Frequency: | 315/433MHZ Option by leaving massage |
| Unit Type: | piece |
| Package Size: | 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) |
| Package Weight: | 0.1kg (0.22lb.) |
Quick Details
Specifications
Here is only Receiver for Professional,
without the transmitter
First of all, you must make sure your own transmitter frequency is 315MHZ or 433.92MHZ
what is the IC Chip Number
our receiver is learning code, it can learn most of Fixed Code and Learning Code Transmitter,
IC Chip like this (2262 2264 2260 2240 1527 etc)
it can not work with rolling code transmitter
Please leave us massage to tell us you need it
315MHZ or 433.92MHZ
Working Voltage: DC12V + - 10%
Working Current: 1Relay 40ma, 2 Relay 70ma
Quiescent Current: 10ma
Working Temperature: -40'c-+60'c
Working Frequency:315/433.92MHZ Optional by leaving us massage
Max Load:10A Relay, Resistive load≤7A,Inductive load≤3A
Receiving Sensitivity: -110dBm
Output State: Output 0V Switching Value use Relay NO COM NC
Max Load:10A Relay, Resistive load≤8A,Inductive load≤3A
Receiver Board Size:46×38×16mm
Encoding Type: Learning Button to add Transmitter
Output Way: Contact (AC/DC) Input DC12V Output 0V Switching Value use Relay NO COM NC
Working Mode: Momentary Toggle Latched adjusted by Jumper
Momentary--------Jumper on one Pin or Take away Jumper
Toggle--------Jumper on "2&3"
Latched------Jumper on "2&3"
Momentary----- Press and Hold---ON, Release----OFF
Toggle-------Press one time ----ON. Press it again ----OFF
Latched--------Press A ----ON, Press B-----OFF
Learning Code
Input DC12V for Receiver, Press the learning button on the receiver until the LED indicator ON, Press transmitter A Button, Receiver LED indicator Flash and Relay A act,Press transmitter B Button, Receiver Receiver LED indicator Flash and Relay B act, Learning Code is finished.
(2 Relay Learning is independently,it can be set Button as your needy)
Clearing Code
Press the learning Button and Hold until the LED indicator ON and Flash,Clearing Code is finished
