Item Type: | Switches |
---|---|
Certification: | CCC |
Switch Type: | Remote Control |
Warranty: | 1 |
Unit Type: | lot (10 Sets/lot) |
Package Size: | 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) |
Package Weight: | 0.2kg (0.44lb.) |
Quick Details
Specifications
please leave us massage for you need us set it as " Momentary " or " Toggle "
Transmitter
It is a RF Transmitter Board without case and the Button, Just Input DC3V-DC12V Power for it, It will transmitting Signal, It is a Micro Transmitter Module for Learning Code Receiver. The Transmitter Module can be controlled by Smoke Detector or others Sensor or Microcontroller.
Working Voltage: DC3V-DC12V
(The Best Voltage is DC9V-DC12V, DC3V Distance will be Shorter)
Input DC3V-DC12V for the Receiver, It Transmitting Signal right now
Modulation Mode: ASK
Quiescent Current: 0uA
Working Current: 8-10 ma
Transmitting Power: 35-50mW
Encoding Type: Learning Code (Ev1527)
Transmitting Distance: 100-300m
Size: 21*11*5mm
Working Frequency: 315/433.92MHZ Optional
![002_conew3](http://upload.ecvv.com/upload/SMT/0000252/32533160845-kfhtb1hnxnkpxxxxxnxpxxq6xxfxxxi121063037htb1hnxnkpxxxxxnxpxxq6xxfxxxi.jpg)
Receiver
The receiver input Power Output Power ,Wide range working voltage, Mini size ,Learning Dot on the receiver to matching the transmitter, the low voltage relay is inward,
the Super-heterodyne receiver module receiving sensitivity is high ,
anti-interference performance is good . so with the comnon transmitter will be much long range
1. Working Voltage:A: DC3V-DC5V B: DC3.5V-DC12V Optional
(please leave us massage for you need A or B )
2. Max Load: 1A (have better load less than 700ma)
3. Working Frequency: 315/433.92MHz
Working Current / Quiescent current : 5-7ma/H
4. Frequency Deviation: more or less than 0.2MHz
5. Working temperature: -20'C- +80'C
6. Receiving Sensitivity: ≥-114dBm
7. Output State: A: Input DC3V-DC5V Output DC3V-DC5V
B:Input DC3.5V-DC12V Output DC3.5v-DC12V
8. Modulation Mode: amplitude modulation (AM)
9: Size: 21mm×11mm×6mm (L×W×H) Mini Size
10. Output state: Momentary Toggle Latched adjustable
11. Learning Code: Learning Dot to add Transmitter
Momentary-----------------Input power for Transmitter, it Transmitting Signal right now, Receiver Receive Signal is ON, Stop to Input power for Transmitter, Receiver is OFF,
Toggle---------------------Input power for Transmitter for 1 time, Transmitter transmitting signal for 1 time, Receiver is ON, Input power for Transmitter 1 time again, Transmitter transmitting signal for 1 time again, Receiver is OFF,
Notice:
It is micro receiver, before you purchase, please measure your load
exact working voltage and current