| Item Type: | Switches |
|---|---|
| Model Number: | 24v-2 |
| Brand Name: | CENTURY AOKE |
| Warranty: | 1 |
| Features: | High-quality |
| Switch Type: | Remote Control |
| Certification: | CCC |
| Receiving Sensibility: | -108dBm |
| Operating Frequency: | 315MHA/433.92MHZ |
| Signal output method: | L4,M4,T4 |
| Size(L*W*H): | 68mm*48mm*16.8mm |
| Voltage: | DC12V/24V |
| Unit Type: | piece |
| Package Size: | 5cm x 5cm x 5cm (1.97in x 1.97in x 1.97in) |
| Package Weight: | 0.2kg (0.44lb.) |
Quick Details
Specifications
Features/ Application:
- High confidentiality, large storage , stable performance and dispensing with traditional jumpers or switches coding, just wireless remote control will be fired the receiving signal controller, make this controller receive and store the signal from remote control.
- Apply in many kinds of wireless devices including hand-held and portable units, window/door transmitters and a variety of detectors and other devices.
- Commonly used to control those wireless products in family, office, hotel, hospital, shopping malls, warehouse etc.
1, Operating voltage | DC12V/24V |
2, Operating frequency | 315/ 433.92 MHz |
3, Frequency deviation | 0.2MHz |
4, Operating temperature | -40C ~ +80C |
5, Receiving sensitivity | 108dBm |
6, Modulation | AM |
7, Signal output method | L4:Latch-signal,M4:Momentary-signal,T4:Toggle-signal |
8, Decoder chip | fixed code (PT2272/ PT2262/PT2264/SC2262 ),learning code(EV1527), |
9, Size (L*W*H) | 68*48*16.8mm |
|
Learning method:
press the learning button 1 time ,the LED indicator flash then press the transmitter button A , until the LED indicator stop ,it mean button A learning successfully
press the learning button 2 times ,the LED indicator flash then press the transmitter button B , until the LED indicator stop ,it mean button B learning successfully
press the learning button 3 times ,the LED indicator flash then press the transmitter button C, until the LED indicator stop ,it mean button C learning successfully
Jog/Non-Latched: press one button is working /ON. loosen your finger on the same button is stop/OFF .one channel switch need one buttons remote control
Self -lock/Self-Latched: press one button for one time is working/ON .press the same button again is stop/OFF .(one channel switch need one buttons remote control
Inter-lock /Latched : press one button is working/ON ,press another button is stop/OFF . ( one channel switchneed 2 buttons remote control )
Remove Code:
Keeping press the learning button 8 second , until the LED indicator stop ,it mean remove code successfully
Package included:
1*receiver (with cover)
2*transmitter (with battery)
