1.Working Voltage: AC220V
2.Max Load:30A Relay, Resistive load≤25A, Inductive load≤20A
3.Channel: 1CH
4.Working Frequency : 315MHZ/433.92MHZ Optional 
5.Receiver sensitivity: : -105Db
6.Working temperature : -10'C - +60'C
7.Output way : Momentary. Toggle .Latched Adjusted by Jumper 
8.Code type: Learning code Add Controller by the Learning Button on the receiver
9.PCB Size : 70*50*18mm
Output State:
It is adjusted by the Jumper on the Receiver Board,

 

 

A: Momentary-----------Put the Jumper on 1 Pin or take away the Pin

B: Toggle------------put the Jumper on “1&2”

C: Latched------------- Put the Jumper on "2&3"

 

Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF,

Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF,

 

 

Latched------------Press transmitter button A, the receiver relay A is ON, Press transmitter button B, the relay A OFF.

 

 

Learning Code

Input AC220V for the Receiver ,the receiver power indicator ON, Press the Learning Button until the Led indicator OFF. Then press transmitter, the Led indicator flash for 3 times, it mean learning successfully.

Clearing Code

 
 press the Learning Button and hold, the LED indicator from OFF to ON, it means clearing is successfully.

 

Package Include:

 

   1 x Receiver(with cover)

   1 x Transmitter (with battery)