Please note before payment : if you choose "Transmitter 433Mhz" or "Transmitter 315Mhz"  It is not including receiver .  this is  only transmitter for buyer convenient to add wall switch.

 

1. Working Voltage: AC220V (Input AC220V Output AC220V)

2.Max Current: 10A (have better lower than 7A )

3.Channel: 1CH

4.Working Frequency : 315MHZ/433MZH

5.Receiver sensitivity: : -105Db

6.Working temperature : -10\'C - +60\'C

7.Output way : Momentary. Toggle .Latched Adjustable

8.Code type: Learning code Add Controller by the Learning Button on the receiver

Transmitting Distance: 10-200m

working/output way:

Jog/Non-Latched: press one button is working /ON. loosen your finger on the same button is stop/OFF .one channel switch need one buttons remote control

Self -lock/Self-Latched: press one button for one time is working/ON .press the same button again is stop/OFF .(one channel switch need one buttons remote control

Inter-lock /Latched : press one button is working/ON ,press another button is stop/OFF . ( one channel switchneed 2 buttons remote control

 

Learning Method:

Keeping press the learning button ,the LED indicator flash fast then press the transmitter button , until the LED indicator stop to flash fast ,it mean learning successfully

 

Remove code:

 

Keeping press the Learning Button on the receiver until the LED indicator flash fast until it flash slow 2 times .it mean the code have cleared successfully