Specifications:

Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.

 

1.Transmitter

Channel: 2 CH

Remote Control Distance: 50m

Encode: Fixed code, soldering 1527

Frequency:315 or 433.92

Size: 55mm x 30mm x 13mm

Power Supply: 1 X 12V/23A (NOT included)

 

2.Models:

1)Toggle/Self-Lock: Press->On; Press again->Off

press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).

2)Latched/Inter-Lock: Press->On; Press other button->Off

press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).

3)Momentary/Jog: Press and hold->On; Release->Off

Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )

 

(Original Setting is  Latched,Change it by yourself.)

 

Decode: Fixed code, soldering

Power Supply (Operating Voltage): DC 12V / 24V / 9V

Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC 

Work Voltage Range of Relay: AC 110-240V or DC 0-28V

Operating Temperature:-40‘C - 80’C

 

3.Package Included

 

1 x Receiver (with cover)

1 x Transmitter (no battery inside)

 

4.Learn code and Remove Code

 

1.Learn:press the learning code .the indicator from  on to  off ,Loosen your finger ,press any button of the remote control ,the indicator flash 2 times and off .it means learning successfully .

2.Remove :press the learning button about 8 seconds , the indicator turn on to off , it means the Code had been removed successfully.