Feature:

This transformer, can't test by the multimeter, otherwise can't measure the real data, and the measured data are inaccurate.

It must connect the transformer to the 12v crystal lamp bead, ensure the electric light after to test.

This transformer can only be used on the 12 v crystal lamp bead, cannot be used in car lights, motorcycle lamps, speakers, and so on other lighting and electric appliance.

 

 

250w can drive 12 pcs 20w Crystal Lamp, or 25 pcs 10w

200w can drive 10 pcs 20w Crystal Lamp, or 20 pcs 10w

160w can drive  8  pcs 20w Crystal Lamp, or 16 pcs 10w

120w can drive  6  pcs 20w Crystal Lamp, or 12 pcs 10w

105w can drive  5  pcs 20w Crystal Lamp, or 10 pcs 10w

80w can drive    4  pcs 20w Crystal Lamp, or  8  pcs 10w

60w can drive    2  pcs 20w Crystal Lamp, or  6  pcs 10w

 

 

Parameters:

1.The input voltage: AC220V   50Hz/60Hz

2.The output voltage: AC12V

3.The power factor: 0.98 above

4. Suitable light source: 12 v/quartz halogen lamp bead, light bulb, lamp cup

 

Life :

normal service life of more than 2 years

Wiring method : red line for input, meet AC220V; White line as the output, the 12 v source.

 

Introduction :

1.Features: this product use famous brand high-quality electronic components, USES the high-grade coil, with high power factor, low temperature rise, no noise, no stroboscopic, etc.

2.the product is mainly suitable for all kinds of low-voltage G4 / G5.3 12 v quartz halogen lamp bead, light bulbs, MR11 / MR16 quartz (halogen lamp cup form a complete set of lighting, and so on.

3. apply lamps and lanterns: common used for crystal lamp, low-pressure lamps and suspension wire light, ceiling lamp, bean pot lamp, grille lamp, lens headlight, corridor lamp, wall lamp, etc.