| Item Type: | Lighting Transformers |
|---|---|
| Output Voltage: | 24 |
| Model Number: | hot |
| Unit Type: | piece |
| Package Size: | 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in) |
| Package Weight: | 0.074kg (0.16lb.) |
Quick Details
Specifications
with a voltmeter display and the voltmeter can be self-calibration. Using a more advanced voltage microprocessor, voltmeter error +/- 0.05V, range 0 ~ 40V. (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage above 4.5V) Touch the button to switch the measurement input or output voltage, and the indicator shows which circuit voltage is being measured, and save the settings, even if the power is turned on again. Onboard voltage meter self-calibration method:On-board voltmeter shows the output voltage, long press the right button for 2 seconds after the release, the voltmeter and the output voltage indicator "OUT" sync flashing, then enter the output voltage adjustment mode; Similarly, in the voltmeter display Input voltage, long press the right button for 2 seconds after the release, the voltmeter and the input voltage indicator "IN" sync flashing, then enter the input voltage adjustment mode; Touch the right button, press the voltage one unit, touch the left button, the voltage down one unit; because a unit voltage is less than 0.1V, so you need to press 1-5 times to see the voltmeter Change the 0.1V, the specific number of consecutive keys depends on the current display voltage; the current display voltage is higher, the fewer the number of press,After the voltage is adjusted, press the right button for 2 seconds to release, then you can exit the voltage calibration mode, all parameters set to automatically save the power save.with a voltmeter display and the voltmeter can be self-calibration. Using a more advanced voltage microprocessor, voltmeter error +/- 0.05V, range 0 ~ 40V. (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage above 4.5V)
Touch the button to switch the measurement input or output voltage, and the indicator shows which circuit voltage is being measured, and save the settings, even if the power is turned on again.
Onboard voltage meter self-calibration method:On-board voltmeter shows the output voltage, long press the right button for 2 seconds after the release, the voltmeter and the output voltage indicator "OUT" sync flashing, then enter the output voltage adjustment mode; Similarly, in the voltmeter display Input voltage, long press the right button for 2 seconds after the release, the voltmeter and the input voltage indicator "IN" sync flashing, then enter the input voltage adjustment mode;
Touch the right button, press the voltage one unit, touch the left button, the voltage down one unit; because a unit voltage is less than 0.1V, so you need to press 1-5 times to see the voltmeter Change the 0.1V, the specific number of consecutive keys depends on the current display voltage;
the current display voltage is higher, the fewer the number of press,After the voltage is adjusted, press the right button for 2 seconds to release, then you can exit the voltage calibration mode, all parameters set to automatically save the power save.
With power indicator
The voltmeter can be turned off, when you do not need to touch the left button can be easily achieved.
With terminal blocks, no soldering iron can also be used easily, and retain the wire connection point.
Input voltage 4.0 ~ 38V. (The input voltage must be higher than the output voltage 1.5v above)
Adjustable output voltage range 1.25V ~ 35V continuously adjustable. (The input voltage must be 1.5V higher than the output voltage)
Output current up to 5A, it is recommended to use within 4.5A.
Output power up to 75W.
high conversion efficiency, up to 96% (efficiency and input, output voltage, current, pressure related)
Load regulation rate S (I) ≤ 0.8%, voltage regulation rate S (u) ≤ 0.8%
With overheating protection and short circuit protection
Size 60 * 37 * 18mm
Colour:blue
Material:metal
Weight 28g
Note: This adjustment method you only need to calibrate once in the entire voltage range can be accurate voltage value, this function is to meet your higher accuracy requirements and design, please rest assured that use.
Applications:
This module can be used in the input voltage is higher than the output voltage of the buck area, such as batteries, power transformers, DIY adjustable power supply, 24V car pen the power supply, industrial equipment buck, 12V to 3.3V, 12V to 5V, 24V to 5V, 24V to 12V, 36V to 24V and so on.
Package Contents: 1 x DC-DC adjustable step-down module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Touch the button to switch the measurement input or output voltage, and the indicator shows which circuit voltage is being measured, and save the settings, even if the power is turned on again.
Onboard voltage meter self-calibration method:On-board voltmeter shows the output voltage, long press the right button for 2 seconds after the release, the voltmeter and the output voltage indicator "OUT" sync flashing, then enter the output voltage adjustment mode; Similarly, in the voltmeter display Input voltage, long press the right button for 2 seconds after the release, the voltmeter and the input voltage indicator "IN" sync flashing, then enter the input voltage adjustment mode;
Touch the right button, press the voltage one unit, touch the left button, the voltage down one unit; because a unit voltage is less than 0.1V, so you need to press 1-5 times to see the voltmeter Change the 0.1V, the specific number of consecutive keys depends on the current display voltage;
the current display voltage is higher, the fewer the number of press,After the voltage is adjusted, press the right button for 2 seconds to release, then you can exit the voltage calibration mode, all parameters set to automatically save the power save.
With power indicator
The voltmeter can be turned off, when you do not need to touch the left button can be easily achieved.
With terminal blocks, no soldering iron can also be used easily, and retain the wire connection point.
Input voltage 4.0 ~ 38V. (The input voltage must be higher than the output voltage 1.5v above)
Adjustable output voltage range 1.25V ~ 35V continuously adjustable. (The input voltage must be 1.5V higher than the output voltage)
Output current up to 5A, it is recommended to use within 4.5A.
Output power up to 75W.
high conversion efficiency, up to 96% (efficiency and input, output voltage, current, pressure related)
Load regulation rate S (I) ≤ 0.8%, voltage regulation rate S (u) ≤ 0.8%
With overheating protection and short circuit protection
Size 60 * 37 * 18mm
Colour:blue
Material:metal
Weight 28g
Note: This adjustment method you only need to calibrate once in the entire voltage range can be accurate voltage value, this function is to meet your higher accuracy requirements and design, please rest assured that use.
Applications:
This module can be used in the input voltage is higher than the output voltage of the buck area, such as batteries, power transformers, DIY adjustable power supply, 24V car pen the power supply, industrial equipment buck, 12V to 3.3V, 12V to 5V, 24V to 5V, 24V to 12V, 36V to 24V and so on.
Package Contents: 1 x DC-DC adjustable step-down module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
