Product Specifications

Products name: Intelligent Light Sensor & Time Controlled Controller

 

Product Description:

 The controller is adopted 8 digital tube to show the modes of time and work. It adopts PWM dimmer electric.It matches the precise clock clip which can control the brightness and darkness of the light according to the time .When present time is same as the predicted time , the light will change as previous brightness. You can set 10 scenes during the 24 hours one day. By optional sensor, the controller can autocatalytically adjust the brightness fo the light according to the brightness and darkness of the environment optical line.The controller can be used for the normal one.The controller works through the infrared remote controller, and operate easily.

Technical Parameters:

Supply voltage:DC12~24V

Output: 3 circuit

Output current: 4A/ch

controller size: L122xW71×H25mm

package size: L135×W80×H55mm

Net weight: 180g

Gross weight: 210g

Static consumption: <0.24W

Output power: 12V≤144W; 24V≤288W

PWM signal class:256 level

PWM signal frequency:325HZ

Remote Control distance:>10M

Time deviation:<5 seconds per month

 

Connection description:

Power input interface(port 1)

     Adopt the 5.5x2.1mm DC connector seat

 

Power input interface (port2):

 

         Adopt the connector seat  with screw.

 

Infrared receiver interface and light sensor socket:

   Adopt built-in infrared receiver, external light sensor

 

 Load output interface: 

 Adopt the connector seat with screw

Direction for use:

Time set

     

Time control function:

When the controller is on, press the brightness hot key on the controller to enter the light adjust mode. When the first number fo the digital tube is 0 that is the controller can change the light according to settled brightness.

With power off memory function. When re-connect to the power supply, it will be the statue that you set before cutting the power supply supply automatically.

 

 

Typical applications:

This controlled is used to controlled the single color strip,can connect 3 pieces single in parallel, its DC12-24V , 4A/CH, "COM" is the Common +,CH1/CH2/CH3 is three - Port.

 Cautions

1, This products Input voltage is DC12V,other input voltage are not allowed.

2, Lead wire should be connected correctly,according to the wire color and the connecting diagram offers.

3, Overload are prohibited.