DMX editor for setting dmx address of our DM series dmx decoders

Performance parameters:

Size: 68 * 42 * 14mm
* Built-in standard DMX512 protocol (1990 edition);
* Support wide voltage (DC 9V-24V) power supply, support alkaline batteries (3 1.5V battery saving), or nickel
Hydrogen batteries (4 1.2V) power supply or 4.5V lithium battery;
* Support for read channel DMX512 DMX512 decode data -driven digital display data.;
* Support for write DMX512 module address code, 1 -512 (1-170 lights) address digital display written address.;
* Support for single-channel DMX512 module detection;

Write code wiring diagram:

Function:

1 READ button: After pressing the corresponding LED lights, reading functions into DMX512 decode driver module buzzer beep,
reading success, then you can see the corresponding DMX512 address displayed on the digital pipe.

2 WRITE button: After pressing the corresponding LED lights into DMX512 write address function.

Press the SET key to set the LED lamps to be written DMX512 address (corresponding to 1-170 lights as a light occupies three channels),
the address value press the SET button digital display will quickly add 1, and wait 1-2 seconds bell,
decoding driver module buzzer sounds, write code successfully, disconnect the LED driver module DMX512 decode the signal line can be

3 TEST button: After pressing the corresponding LED lights into the DMX512 signal detection.

Press the SET key to set to test LED lighting DMX512 address (address value press the SET button digital display will quickly add 1),
the corresponding LED will be displayed address fade fades.

Package included

1 x  DMX editor