Newest High-voltage AC100-240V DMX Decoder controller with LCD display is a kind of controller with LCD digital display interface, used for control the RGB color change of 4 line 3 channels(common anode) X 2A/CH, it is good for 110V/220v RGB led strip or RGB Led neon Light ,  up to 34kinds of change programs to choose, at the same time can accept DMX-512 international standard digital control. Controller can be stand-alone operation, automatically online, accept standard DMX512 console control signal etc. method to work. According to the customer\'s actual demand, can achieve jumpy changing, gradual changing, stroboscopic such change effect.

 

Technical parameters

Working temperature: -20-60

Power supply voltage: AC 100-240V 50/60HZ

Output voltage: DC 100-240V

Output connect way: common anode 4 line 3 channels

Power plug : EU/US/AU/UK plug

External dimension: L203x W134x H50 mm

Packing size: L310xW170x H60 mm

Net weight: 0.78kg

Static power consumption: <3.96W

Maximum output current: 3CH*2A/CH

Dimming frequence: 800Hz

Maximum output power: 660W(input voltage 110V), 1320W (input voltage 220V)

 

External Dimension

   

 

Interface Specification

power supply interface: input AC100240V

Insurance block: when short circuit, can protect the whole circuit

Switch: control whole controller power on/off

,DMX512 signal input/output interface: interface sequence and detailed see below picture

 

Load output interface: load output, interface detail instruction see below picture.

+Load common positive pole

RLoad red output pole

GLoad green output pole

BLoad blue output pole

 

 

Product packing schematic diagram

Direction for use

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can

not occur between connecting wire before you turn on the power.

Controller have 4 function setting key: MODE, PARA, UP, DOWN.

2. MODE key choose in turn or press UP, DOWN key to choose:

No.	Display content	Instruction
1	BLACK	Static black
2	STATIC RED	Static red
3	STATIC GREEN	Static green
4	STATIC BLUE	Static blue
5	STATIC YELLOW	Static yellow
6	STATIC PURPLE	Static purple
7	STATIC CYAN	Static cyan
8	STATIC WHITE	Static white
9	COLOR CHANGE	Seven color jumpy changing
10	COLOR CHANGE2	Jumpy changing (flicker)
11	6 COLOR CHANGE	Six color jumpy changing
12	6 COLOR CHANGE2	Jumpy changing (flicker)
13	RGB CHANGE	Three color jumpy changing
14	RGB CHANGE2	Jumpy changing (flicker)
15	RG CHANGE	RG jumpy changing
16	RB CHANGE	RB jumpy changing
17	GB CHANGE	GB jumpy changing
18	WHITE CHANGE	White stroboflash
19	7 COLOR SMOOTH	Seven color gradual changing
20	4 COLOR SMOOTH	Four color gradual changing
21	RG SMOOTH	RG gradual changing
22	RB SMOOTH	RB gradual changing
23	GB SMOOTH	GB gradual changing
24	COLOR GRADUAL	Seven color fade in and out
25	RGB GRADUAL	Three color fade in and out
26	WHITE GRADUAL	White fade in and out
27	RG GRADUAL	RG fade in and out
28	RB GRADUAL	RB fade in and out
29	GB GRADUAL	GB fade in and out
30	R GRADUAL	R fade in and out
31	G GRADUAL	G fade in and out
32	B GRADUAL	B fade in and out
33	ADJUST MODE	0-255 level adjusted color
34	AUTO PROGRAM COLOR CHANGE2	Auto operation selecting result of changing
35	DMX512 MODE	DMX512 control order
36	DMX512 DECODER	DMX512 decoder

   

 

3.Press PARA to adjust in turn: (18 is static state, do not have adjust function)

No.	Parameters display	Instruction
		Maximum	Minimum
1	RUN SPEED	100	0
2	RUN TIMES	100	0
3	LOAD DEFAULT	Restore the factory parameter

4. UP: increase parameter key/preset parameter.

5. DOWN: decrease parameter/preset parameter.

6. AUTO PROGRAM mode is repeatedly cycle running part or all of 6-31 patterns run,you can set whether participating in repeated cycle of operation or not in RUN TIMES.

7. RUN TIMES: compiling the run times of the pattern under 33 AUTO PROGRAM, if the run times is 0, you can skip the pattern,that means not running the pattern.

8. Preset parameter: each form has independent factory preset parameter, which is kept in controller separate. LOAD DEFAULT can recover the factory parameter of the form. If under AUTO PROGRAM mode, using LOAD DEFAULT can unified recover the parameter of all forms to factory parameter.

9. 32 ADJUST MODE is manual dimming, it can adjust the brightness of RGB 0-256 level respectively.

10. 34 DMX512 MODE is controlling all patterns (the first address) and speedthe second address).

11. 35 DMX512 DECODER is DMX decoder, completely accepting outside DMX512 signal to work. Taking 4 addresses, R(the first address), G(the second address), B(the third address), reserved channel(the fourth channel), in need of setting addressby pressing PARA).

Typical application

Typical application 1---do not have DMX function: