DSE710 generator control ats module deepsea generator auto start control

 

Introduction

The DSE710 is an Automatic Start Control Module that offers an advanced range of engine monitoring and protection features. The module has been designed to monitor generator frequency, generator volts, generator current, engine oil pressure, engine coolant temperature, engine running hours and battery volts. The module also displays the engine speed. When the module detects a fault condition it automatically shuts down the engine and indicates the exact fault on the modules LCD display or relevant LED indicator.   The module can be configured using the front panel or via the DSE810 interface and a PC. The module can also be controlled from a PC that is located up to 100 meters away.

 

Technical data

Power Supply	8 to 35 Vdc Continuous
Cranking Dropouts:	Able to survive 0 V for 50 mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries
		Max Current	Operating 180mA at 12V, 190mA at 24V ; Standby 145mA at 12V. 150mA at 24V
Alternator Input Range	35V(L-N) to 277V(L-N) AC (+20%) 50Hz - 60Hz (min 15V AC)
Auxiliary Output:	Solid state 2.4A DC at supply voltage
Fuel/Start Output:	Solid state 3.4A DC at supply voltage
Generator C.T.	5A secondary 0.5VA
Operating Temperature Range:	-30 to +70°C