dc 12-24v knob touch switch rgb led controller for 3528 5050 rgb led strip 11 modes wall mounted output 3 channel 4A/channel

Technical Parameters
1. working temperature: -20-60
2. supply voltage: DC12-24V
3. Output:3 Channels
4. connection mode: common anode
5. external dimension:L86 X W86 X H35.5mm
6. packing size: L105 X W105 X H53mm
7. static power consumption: <1W
8. output current: <4A( each channel )
9. output power: 12V<144W,24V<288W
 

Touch panel controller is a kind of new high-end controller which newly developed by our company. It adopts glass panel design with beautiful and fashionable appearance. It adopts high precision capacitance touch control chip, increases the touch sensitivity,  and reduces trigger which caused by mistake. It is used to control a variety of lamp whose source of light is LED. For instance, point source of light,flexible light strip, wall washer lamp, glass curtain wall light etc.. It has many advantages such as convenient to connect, easy to use and so on.

 

 

 

External Dimension:

 

 

Interface Specifications:

1. blue light cathode,  2. green light cathode, 3. red light cathode, 4. common anode,

5.input power anode, 6. input power cathode

 

 

Panel key instructions:

1. speed/brightness increase key——when the controller is open, brightness of light can be increased in static mode(the highest level is 100); speed of light can be increased in dynamic mode(the highest level is 100)
2. speed/brightness reduce key——when the controller is open ,brightness of light can be reduced in static mode(the lowest level is 1); speed of light can be reduced in dynamic mode(the lowest level is 1)
3. mode increase——when the controller is open, mode can be increased(the highest is 21)
4. mode reduce——when the controller is open, mode can be reduced(the lowest is 1)
5. static red——when the controller is open, lamp can be changed to static red.
6. static green——when the controller is open,lamp can be changed to static green.
7. static blue——when the controller is open,lamp can be changed to static blue.
8. static white——when the controller is open,lamp can be changed to static white.
9. cor circle——when the controller is open,lamp can be changed to corresponding color when color circle is touched.
10.on/off key——to control the open and close of lamp when power on.


Typical Application

Remark

1. Connect the load wire at first, following by the power wire; Please ensure there is no short circuit  between input and out put connecting wire before power on;

2.The supply voltage of controller ranges in DC12V-DC24V, it may burn out the controller once exceed the voltage ranges.

 

Q: How can I get a discount?

A: The prices showed in our store are the best price we could offer. It's the cheapest price you can get. However, if your order quantity is more than 50pcs(total quantity for one order), you may contact us before payment, we can probably save some shipping cost for you.

For very big orders, of course we will offer some discount.

Please follow below process to get the discount.

1. Make an order first, do not pay immediately.

2. Leave us a message to tell us the quantity and shipping method you want.

3. We will change the amount for you as soon as possible.

4. Send the payment.

 

Q: What can I do if I haven't received the parcel for a long time?

A: If the  tracking information shows left China mainland or Hong Kong

but no information on your local post office website, the parcel now is on the way to your country, or arrived at your country but no updated information received from your local post office yet, please be patient to wait.

If the protection time is less than 10 days but you still haven't got the parcel, please contact us, we will extend the protection time for you and try to  find the reason for delay and try to solve and tell you the latest information we got.