| Item Type: | RGB Controler |
|---|---|
| Features: | Switches |
| Certification: | CE,RoHS,CCC |
| Power Source: | AC |
| Remote Distance: | 8m |
| Max. Load Power: | 000 |
| Connection Mode: | PIR |
| Controled Method: | PIR Sensor Switch |
| Material: | Plastic |
| Oscillation frequency: | 50 |
| Wattage: | 2w |
| Warranty: | / |
| Voltage: | 240V |
| Applicable Lights: | LED Strip |
| Brand Name: | Apluses |
| Unit Type: | piece |
| Package Size: | 15cm x 10cm x 5cm (5.91in x 3.94in x 1.97in) |
| Package Weight: | 0.1kg (0.22lb.) |
Quick Details
Specifications
AC180-240V 0.01A PIR Motion Sensor Switch Wall Type Human Body
Induction Switch For Home Corridor LED light
Remarks:
1.This switch can only work with the Mi.Light products(infrared bulbs,infrared downlights,infrared spotlights)
2.The performance of the sensor switch is affected by the working temperature.
people's clothing,people's walking speed,directions or other factors,the sensing distance can be 8 meters or even more when the temperature is below 23 degree,it can be shorter than 8 meters when the temperature is above 30 degree.
Product Characteristics
PIR sensor switch a wireless switch, easy to use and installation without wiring with the lights, the sensing dist
ance can reach 8 meters.
The PIR lamps have the function of automatic signal transmiting.
The lamps can send each other signal within 30 meters, which makes the sensing distance limitless
Parameters:
Voltage: AC180-240v/50Hz/0.01A
Sensing Distance: Max. 8m
Sensing Angle: 110 degree
Suitable Installation Height: 1.2-1.5m
Control Distance: 30m
Size: 86mm*86mm*47mm
How to use:
1.Preparation Mode
The red indicator will be on when the switch is connected to power,it turns into“ preparation mode ”,after 1
min,the red indicator will be gone,the “ preparation mode ”is finished,the switch stars to work properly.The
red indicator will turn on again when it detects the movement of objects
2.Link/Unlink
Link:
When the switch is connected to power,press "SET" one time,the red indicator will blink slowly,you are
ready to link the lights to switch,switch off the power of the lights which you want to link,turn to them again
after 3 seconds,the lights will blink 3 times slowly,the link is done,press "SET" once again if you don't want to
link more lights.
Unlink:
if you want to unlink the lights which you have linked,do as below:
When the switch is connected to power,hold "SET" for a while,the red indicator will blink quickly,you are
ready to unlink the lights to the switch,switch off the power of the lights which you want to unlink,turn on
them again after 3 seconds,the lights will blink 10 times quilckly,the unlink is done,press "SET" once again if
you don't want to unlink more lights.
3.Switch Settings:
There are 6 mini switches on the switch,we divide them into 3 zones according to the sequences from left to
the right,each mini switch u can push on and down,we use "1" for up,"0" for down.
A.Zone 1(mini switch 1 and 2)stands for the "Lasting Time",which means the lights will be on for how
long when the switch sences the movement of objects.
B.Zone 2(mini switch 3 and 4)stands for the "Sencing illumination",which means the lights will be on under
how much lux when the switch sences the movement of objects.
C.Zone 3(mini switch 5 and 6)stands for the "Night Light Mode",which means the light will be on all the time
as night light when there is no movement of objects.
