E1.31 (sACN) to LED Smart Pixel Controller

?Perfect for Madrix

DC 5V or 12V

Compatible Pixel Types: WS2811, WS2812, WS2812B, WS2801, GECE, 6803, 1804(s)

Multicast Format

 

 

Product manual

 

 

Multicast Format

Input: E1.31 Protocol over Ethernet & DC5V/12V Power

Output: Pixel lighting signals & DC5V/12V Power

Controllable Pixel Types:

WS2811 WS2812 WS2812B  /  WS2801  /  GECE  /  6803  /  1804(s)

Unit Size: L11.5cm x W9cm x H4 cm ; Package Size: 16x16x6cm ; G.W.: 350g
Accessories:		(1) Regulated DC 5V 3A Power Supply -- 1 pc
		(2) One meter length RJ45 network cable -- 1 pc

 

	Product Brief
(1)	Multicast Format E1.31 (sACN) to LED smart pixels controller, output up to 2040 channels, 170 pixels for each output port, total 680 pixels.
(2)	Controllable Pixel Types:
	WS2811 WS2812 WS2812B /  WS2801  /  GECE  /  6803  /  1804(s)
(3)	Max DC Current Input/Output: 10 Amp.  DC Voltage Input/Output: 5V or 12V
(4)	Accessories in packakge: DC5V 3A power adapter - 1pc ; One meter RJ45 network cable - 1pc.
(5)	E1.31 to pixel over Ethernet in Mutilcast format, configurable via web browser.
(6)	Multiple controllers with different output universe number assigned can be used via a network (LAN) connection to achieve more channels output.
(7)	Compatible with any software package that supports the E1.31 (sACN) protocol output. For software output setup, just select the E1.31 / sACN / ACN output type, no need for driver installation.

 

Recommended softwares with E1.31 output option.

(1) Madrix

(2) MagicQ

(3) Luminair

(4) LSP: Light Show Pro

(5) Vixen

(6) Lightjams

(7) LOR: Light-O-Rama

(8) LightFactory

(9) Nutcracker (xlights)

(10) Jinx

(11) QLC (Q Light Controller)

(12) Martin M-PC

(13) OLA

 

Product manual

 

 

AliExpress does not support external link,  you need to type above link manually in your web browser.

 

How to open the Configuration Web Page
Note: You will not be able to access the E1.31 to DMX configuration web page interface with your browser if the 'WEB' LED indicator is off.
If you have powered up the interface and have connected the interface directly to your computer's RJ45 Jack, and you need to open the configuration web page immediately, pls follow below steps:
(1)	Push the RESET button to restart the interface, then push and hold the MODE button, after a few seconds, you will see both 'WEB' & 'SIGNAL' LED indicators flash together at a rate of one flash per second.  After 3 flashes, release the MODE button!
(2)	After a few seconds, the 'WEB' LED Indicator will turn on.
(3)	Then go to your web browser(Google Chrome is recommended) and type the interface's temporary IP 169.254.74.73  at address bar and click Enter key, you will bring up the configuration web page.
Note: The web page server doesn’t operate continuously because the E1.31 to Pixel Interface is only capable of 4 simultaneous internet connections.
So, although the first 3 connections can be dedicated to receiving pixel dimmer data full-time, the last connection has to be shared between receiving E1.31 to Pixel and running the web server.
You can connect the E1.31 to Pixel Interface to a LAN router/switch or directly to a PC.
The Interface works in Multicast Format, which means IP setting is not a must.
If you connect the interface directly to your computer's RJ45 Ethernet Jack, you can forget the unit's static IP.
The interface is in multicast format, not unicast format, so the interface's static IP is only for webpage configuration via router, not for e1.31 data receiving.
DO NOT specify any IP in your software's output setting. The interface/unit is working in MULTICAST format, not unicast format.
The unit's IP is only for Configuration web page opening via router/switch, but you can always open the Configuration web page by connecting the unit directly to your computer via temporary IP: 169.254.74.73
We always recommend you to configure the interface with the unit connecting to your computer directly.   Configuration Webpage --

Product manual