Item Type: | RGB Controler |
---|---|
Power Source: | DC |
Remote Distance: | 20-30M |
Warranty: | 2 years |
Oscillation frequency: | 2400-2483.5MHz |
Controled Method: | 2.4G RF control |
Certification: | CE,RoHS,EMC |
Brand Name: | GR-SHINY |
Voltage: | 12-24V |
Max. Load Power: | 360w |
Connection Mode: | Common anode |
Applicable Lights: | LED |
Model Number: | GSA-CM01 |
Material: | aluminium and plastic |
Wattage: | less than 1W |
Supply voltage: | 2pcs AAA battery |
Control Mode: | GFSK |
Static power consumption: | 10uA |
External dimension: | 110*55*20mm |
Output Power: | 5V<75W, 12V<180W, 24V<360W |
Button Number: | 2 |
Unit Type: | lot (5 pieces/lot) |
Package Size: | 25cm x 16cm x 16cm (9.84in x 6.30in x 6.30in) |
Package Weight: | 2.0kg (4.41lb.) |
Quick Details
Specifications
New RF Music 2.4G wireless remote control Voice receiving sensitivity RGB Controller for All RGB LED Light support wifi
Product Description:
2.4G Music Controller adopts the advanced micro control unit.
It is used for controlling a variety of LED lamp. For instance, LED strips,
LED module light , LED light box, uminous characters etc.
It has many advantages such as low cost, convenient connection and ease of use;
With memory storage function, you can adjust the static brightness,
static color, dynamic speed regulation and so on lighting change effects via the RF 2.4G remoter.
When it is in sound-control mode, the colors will change with the music rhythm.
Main features:
Rf 2.4 G wireless remote control signal, sensitive and stable, strong anti-jamming capability.
Voice receiving sensitivity is adjustable
3 set of output can realize more convenient for wiring
Adopt the self-locking socket
2 kinds of acoustic change model optional
Wide input voltage high power output
Technical Parameters
Working temperature:-20-60
Supply voltage:DC5V, 12V~24V optional(please specify required voltage when order is placed)
Output:Three CMOS drain open circuit output,three-way joint
Connection mode:Common anode
Controller size:L155×W75×H30mm
Unit package size:162*82*58mm
Net weight:155g
Gross Weight:205g
Static power consumption:<1W
Output current:<5A(each circuit )
Output Power:5V<75W, 12V<180W, 24V<360W
The Remote control parameter are as below table:
Item | Parameter | Remarks |
Supply voltage | 3V | 2pcs AAA battery |
Transmitting frequency | 2400-2483.5MHz |
|
Control Mode | GFSK |
|
Transmitting power | 6db |
|
Static power consumption | 10uA |
|
Remote distance | 20-30M |
|
External dimension | 110*55*20mm |
|
Direction for use
Function introduction:
1Use the 2.4G frequency RF remote control, no need to make the remote direct to the controller,and the RF remote can controlled it across obstacles.
2In the open area remote control distance is about 30 meters.
3Adopt the press key and touch wheel control remote, slightly touch the color wheel can adjust the light’s color temperature smoothly .
Operation method:
1.Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
2.Only the power button is effective in the OFF station, press the power button for the first time then controller will enter to the last mode before turn of the controller last time (memory off function)
3After start up,press“Mode+”“Mode-”can realize 22 kinds of effect mode selection.The mode is shown in the table below :
Number | Mode | Adjustable state | Number | Mode | Adjustable state |
1 | Static red |
Brightness is adjustable to level 10, speed is not adjustable
| 12 | Seven colors gradient |
Brightness is adjustable to level 10, speed is adjustable to level 10 |
2 | Static Green | 13 | Red strobe | ||
3 | Static blue | 14 | Green strobe | ||
4 | Stagic yellow | 15 | Blue strobe | ||
5 | Static purple | 16 | Yellow strobe | ||
6 | Static cyan | 17 | Purple strobe | ||
7 | Static white | 18 | Cyan strobe | ||
8 | Red green blue jump | Brightness is adjustable to level 10, speed is adjustable to level 10
| 19 | White strobe | |
9 | Six colors gradient | 20 | Red blue jump | ||
10 | Severn colors jump | 21 | Green blue jump | ||
11 | Red green blue gradient | 22 | Red green jump | ||
|
|
|
|
4When it is in Cyclical mode, press “mode+”, can be back Static red(1), press “mode-”, can be back Red green jump(22).
5When it is in color wheel adjusting mode, press“mode+” or“mode-”,will be back the last selected mode.
6When it is in music mode, press“mode+” or“mode-”,will be back the last selected mode.
7Long press “speed+”,“speed-”“brightness+”“brightness-”, can adjust the speed and brightness.
8Press“Music mode+” or “Music mode-”,the controller go into voice controlling statue, the output will be changed following the music rhythm. There are 10 change effects available as following:
Number | Mode | Number | Mode |
1 | DJ Red | 6 | DJ Cyan |
2 | DJ Green | 7 | DJ White |
3 | DJ Blue | 8 | DJ seven colors |
4 | DJ Yellow | 9 | Jazz seven colors |
5 | DJ Purple | 10 | Tenderness seven colors |
Detail Picture