The Artnet-DMX converter is an Ethernet control system based on the Artnet protocol. It can convert network packets from the Artnet protocol to standard DMX512 data on the network. It adopts high-speed ARM processor, conforms to the standard Artnet protocol, and provides RJ45 network interface As well as the standard DMX512 output interface.
 
  Artnet-DMX-1 can be configured as Artnet to DMX512 or DMX512 to Artnet.
 
  Can be compatible with the Artnet protocol lighting control software configuration is widely used in led dot matrix and the need for a large number of DMX512 data stage lighting control network, commonly used in television recording and broadcasting the scene, stage performances, entertainment and so on.
 
I. Performance parameters:
Artnet-DMX-1
Power input: 5-24VDC (with power adapter)
Receive signal: Artnet / DMX512
Output signal: DMX512 / Artnet
DMX channel: 512 channels
Working temperature: -30C ~ 65C
Product size: L120 * W73 * H45mm
Packing size: L135 * W80 * H50mm
Weight (gross weight): 290 grams
 
II. product features:
1. Based on Artnet protocol network data communication, can receive network DMX data;
2. IP address and Subnet binding, users do not need another set, can be inserted and used;
3. You can manage Artnet in broadcast or unicast mode;
4. You can set different network segments to avoid multiple groups of Artnet data in the same network interfere with each
other;
5. Compatible with the Artnet protocol lighting software, the output can also control the stage lighting, led lighting.
 
III. Precautions
1. This product should be commissioned by qualified personnel to install
2. This product is not waterproof, need to avoid the sun and rain, installed in the outdoor use waterproof box
3. Good thermal conditions will extend the life of the controller led, please install the product in a well-ventilated
environment
4. Please check the use of the led power supply voltage is in line with the product's voltage range requirements
5. Use the wire diameter size must be sufficient to load the led lighting, and to ensure a solid wiring
6. Power debugging money to ensure that all wiring is correct, so as to avoid wiring errors led to led lighting damage
7. If there is failure, please do not repair; if in doubt please contact us
 
IV. Warranty Agreement:
1. Buy LTECH led controller products enjoy life-long technical support and warranty service:
Free Warranty: 5 years from the date of purchase product quality problems ltech will give free repair and replacement
services
Paid Warranty: Products that cost more than the free warranty period will be charged the appropriate cost of repair
materials
2. The following is not free warranty or replacement service range:
* Too high voltage, overload, improper operation that damage caused;
* Product shape seriously damaged goods deformation
* Damage caused by natural disasters and force majeure;
* Product warranty label and product unique bar code damage;
* The product has been upgraded;
3. repair or replacement is ltech the only customer not on the measures, ltech does not assume any incidental damage
liability;
4. As long as ltech enjoy the right to amend or adjust the terms of the warranty, and issued in writing that shall prevail;