NAME:WiFi 0-10V Touch Panel Dimmer

Model:TM113

 

I. Product Summarization

TM113 is 0-10V dimmer independently developed by our company, which integrates WiFi dimming

and 0-10V dimming. Dimming function of TM113 is more powerful, and more flexible to use. when

using, you do not need to switch wireless networks, it is more convenient to be on internet.

 

Upgrade software integration WiFiManager function makes network configuration of TM113 more

convenient, you can independently choose wireless network just by mobile phone, no need to use

the computer. Combined our independently developed mobile software Touchhome with controller,

which makes TM113 more convenient to control. It adopts capacitive touch chips, achieves precise

dimming, hardware layout is reasonable, can reduce trigger which caused by mistake. It provides

more comfortable and convenient, safer intelligent lighting control than traditional lighting control,

which gives user a new comfortable lighting environment.

II. Technical Parameters

1. Software technical parameters

1. Name: Touch Home+

2. Runtime platform: ios (iphone,ipad), Android (phone,pad) equipment must have WiFi function.

3. Language: English, Chinese

4. Category: communication

 

2. Touch panel dimmer technical parameters

1. Working voltage: AC90~240V / 50-60Hz

2. Working temperature: -20-60

3. Working power consumption: <2W

4. Dimming method: 0-10V signal output dimming

5. Output power: <200W (Load power of 0-10V dimming driver)

6. Controller weight: 160g

7. Gross weight: 221g

8. External dimension: L86 * W86 * H37 (mm)

9. Packing size: L90 * W90 * H40 (mm)

 

3. External Dimension

 

 

 

III. Instruction for use

Step 1: Get to know WiFi touch panel dimmer

Step 2: Interface specifications

Step 2: Install TouchHome+ control software

Step 4: Configure touch panel dimmer

Step 5: Phone control

Step 6: Install touch panel dimmer

Step1:Get to know WiFi touch panel dimmer

The function of each button is as shown below:

 

slide bar control, adjust brightness of lights, in the case of opening buzzer, each operation when let

go, you can hear “di”, which means the operation is effective.

 

scene 1:

Long press: press the button for around 5s, store the current scene, light is on; in the case of

opening buzzer, “didi” of buzzer, that has been stored the scene, release your hand, the

corresponding LED will light; if the buzzer is off, long press for a while, then you can release your

hand, the corresponding LED will light.

Short press: switch to stored scene, the button indicator pressed will light, when buzzer is on, you

can hear “di” of buzzer.

 

scene 2:

Long press: press the button for around 5s, store the current scene, light is on; in the case of

opening buzzer, “didi” of buzzer, that has been stored the scene, release your hand, the

corresponding LED will light; if the buzzer is off, long press for a while, then you can release your

hand, the corresponding LED will light.

Short press: switch to stored scene, the button indicator pressed will light, when buzzer is on, you

can hear “di” of buzzer.

 

scene 3:

Long press: press the button for around 5s, store the current scene, light is on; in the case of

opening buzzer, “didi” of buzzer, that has been stored the scene, release your hand, the

corresponding LED will light; if the buzzer is off, long press for a while, then you can release your

hand, the corresponding LED will light.

Short press: switch to stored scene, the button indicator pressed will light, when buzzer is on, you

can hear “di” of buzzer.

 

scene 4:

Long press: press the button for around 5s, store the current scene, light is on; in the case of

opening buzzer, “didi” of buzzer, that has been stored the scene, release your hand, the

corresponding LED will light; if the buzzer is off, long press for a while, then you can release your

hand, the corresponding LED will light.

Short press: switch to stored scene, the button indicator pressed will light, when buzzer is on, you

can hear “di” of buzzer.

 

On/off switch. When controller switch is turned on, the backlight is off, operations of other keys are

effective, it can perform operation of all functions. When controller is turned off, the backlight will l

ight up, it can not perform the above operation, can only perform on/off switch

Long press the button around 5s: you can hear “di, di”, and then release the button, you can turn

on/off the buzzer;

Long press the button around 10s: you can hear “di, di, di”, dimmer will restore factory settings.

 

 

Step 2: Interface specifications

 

 

Step 3: Install control software of smartphone

1. IOS software installation

Method 1: iPhone or iPad App Store installation

Open iPhone or iPad App Store, input “TouchHome+” into search box, click “search” button, look for

“TouchHome” software installation in the list, as shown below, click “installation”, the software will be

installed in mobile phone.

 

Method 2: computer-based version iTunes installation

If the computer is not installed iTunes software, please download it from apple official website and

install it. Open “iTunes” software, connect iPhone or iPad to computer via data line, input

“TouchHome+” into search box, click “search” button, look for “TouchHome+” software installation in

the list, as shown below, install it into mobile phone.

 

 

2. Android software installation

There are two cases:

The first: User devices support play store

 

Method one: phone or pad Play Store installation

Open “play store” in the phone or pad, input “TouchHome+” into search box,click “search” button,

look for “TouchHome+” software installation in the list, install it into mobile phone, as shown in the

figure.

 

Method two: computer installation

Open web browser, input “TouchHome+” into search box,click

“search” button, look for “TouchHome+” software installation in the list.

 

 

If user’s phones or pad has bound with user’s account, click “installation”, open mobile phone Play

Store, software will autoload to download list. If not, user devices must adopt method one or method

two to download software.

 

The second: User device don’t support Play Store

Open web browser, input website, input “TouchHome” into search box, click

“search” button, look for “TouchHome+” software installation in the list, as shown in the figure.

 

 

Step 4: Configure touch panel dimmer

Dimmer factory default parameter: mode: Ad hoc network (AP), SSID:TM113-XXXXXXXXXXXX,

password : none. Configuring dimmer mobile phone should be installed “TouchHome+” dimmer

software.

Steps of configuring dimmer:

1. Restore factory settings

     Press “ON/OFF”for 5s, you can hear “di, di, di” of buzzer. Dimmer restores factory settings, at

this moment, type of network is mode: Ad hoc network (AP), SSID:TM113-XXXXXXXXXXXX,

password : none. If it is factory default, the step can be omitted, directly enter into step 2.

2. Mobile phone joins the dimmer wireless network(SSID: TM113-XXXXXXXXXXXX, password:

none)

    Open mobile phone WiFi, search “TM113-XXXXXXXXXXXX”, join it, as shown below:

 

 

 

3. Setting network

Open “TouchHome+”, click “more”, open the page as shown below, choose the equipment which

need to be modified, input the network information you need to add, click “send”, then the dimmer

network setting is finished.

 

 

Page description:

1. Refresh: If the equipment is not refreshed automatically, click the key, then you can refresh

equipment manually.

2. Device list: show current equipment connected to this router, the blue circle indicates being

chosen.

3. Account: The router SSID you need to add.

4. Password: The router password you need to add.

5. Send: Determine the key.

4. Test dimmer

Add the mobile phone to the router in which dimmer joins, open the page on step 3, click “refresh”,

check whether dimmer has joined in this router or not, if you can inquiry equipment in device list, it

shows that the device settings are successful. Otherwise, reset from step 1.

 

Step 5: Phone control

Open “TouchHome”, click “area”, add room->add equipment->control equipment. Click added

equipment,enter into the page as shown below.

Page description:

1. Drawer slip: brightness adjusts the drawer slip.

2. Open: open dimmer output.

3. : increase the brightness, each click will increase the brightness 1, long press increases the

brightness continuously.

4. :decrease the brightness, each click will decrease the brightness 1, long press decreases the

brightness continuously.

5. Close: close dimmer output.

 

 

Step 6: Install dimmer

1. Use of "-" word screwdriver at the notch touch panel gently pry, slowly remove the panel, as

shown below:

 

 

2. The controller is fixed on the wall bottom shell with 86 × 86 installation box screws (box installed

customers need to purchase their own), as shown below:

 

 

 

3. The controller of glass panel before open cover, thus the installation is complete, as shown

below:

 

 

 

IV. System Application Diagram

   When there are multiple dimmers in user’s wireless network, the system structure is as shown

below. User can intelligently control these dimmer through “TouchHome”. In a control system, it can

accommodate multiple dimmers, about control mode, please refer to “TouchHome” software

instructions.

 

 

 

Note: the dimmers in the diagram is connect with external power supply, output AC80-240V of

TM113 is not enabled, and can also provide AC90-240V power supply for external device.

 

V. Notice

1. Please don't install dimmers in a seal off , high magnetic field ;

2. In order to reduce the risk of fire disaster and device damage caused by short circuit , please

make sure correct connection;.

3. Installation position of dimmers should be as near as possible to the router so as to ensure

normal controlling;

4. Any problem , please do not open the shell of dimmers at will.

5. This manual is only applicable to this model of dimmers, if there is an update without prior notice.