T-200K system features

    1,32—256 Gray, Gamma correction procession software

    2,Combined with video encoding and broadcasting software LedEdit , support rules and specific-shaped handle, and other points, line lights source

    3,Eight-port output,port 512/1024 lights, can online but also offline,computer online can support 240000 pixels points

    4,Connect the computer network port directly

     5,Can download programs to the controller from computer  

     6,Use a serial cable between controllers cascaded without external switches

     7,Controller encoding use the hardware DIP settings to make the project more  stable in use

We provide two different products according to different applications T-200K and T-200K-B 

T-200K	Eight-port on-line controller Can also be played off-line Port 512 points Frame rate of 30 frames/sec to sure For different IC, controller burn different programs
T-200K-B	Eight-port on-line controller Can also be played offline Port 512 points Frame rate 15-25 frames/sec, frame rate may be different in different chip Controller program can compatible with different IC

 

 

 

 

 

 

 

 

 

 

 

 

Specific parameters

       Memory card

          Type:SD card(if control more lights, suggest using high-speed SD card

          Capacity:1GB—2GB

          Format:FAT format

          Store files:*.led

       Physical parameters

           Size:277*180*47mm

           Weight:1.3Kg±0.2Kg

           Temperature:-20—85

           Power supply:AC 110v-240V input

           Power:10W

 

DIP switch settings

   Controller encoding to be set using DIP switches. Setting as follow:

NOTE: In the form, DIP status‘0’means ON,‘1’means OFF 

DIP sequence(8—1)	Controller number	Controller IP
00000000	No.1	192.168.60.50
00000001	No.2	192.168.60.51
00000010	No.3	192.168.60.52
00000011	No.4	192.168.60.53
00000100	No.5	192.168.60.54
00000101	No.6	192.168.60.55
00000110	No.7	192.168.60.56
00000111	No.8	192.168.60.57
00001000	No.9	192.168.60.58
00001001	No.10	192.168.60.59
00001010	No.11	192.168.60.60
00001011	No.12	192.168.60.61
00001100	No.13	192.168.60.62
00001101	No.14	192.168.60.63
00001110	No.15	192.168.60.64
00001111	No.16	192.168.60.65
00010000	No.17	192.168.60.66
00010001	No.18	192.168.60.67
00010010	No.19	192.168.60.68
00010011	No.20	192.168.60.69
00010100	No.21	192.168.60.70
00010101	No.22	192.168.60.71
00010110	No.23	192.168.60.72
00010111	No.24	192.168.60.73
00011000	No.25	192.168.60.74
00011001	No.26	192.168.60.75
00011010	No.27	192.168.60.76
00011011	No.28	192.168.60.77
00011100	No.29	192.168.60.78
00011101	No.30	192.168.60.79
00011110	No.31	192.168.60.80
00011111	No.32	192.168.60.81
00100000	No.33	192.168.60.82
00100001	No.34	192.168.60.83
00100010	No.35	192.168.60.84
00100011	No.36	192.168.60.85
00100100	No.37	192.168.60.86
00100101	No.38	192.168.60.87
00100110	No.39	192.168.60.88
00100111	No.40	192.168.60.89
00101000	No.41	192.168.60.90
00101001	No.42	192.168.60.91
00101010	No.43	192.168.60.92
00101011	No.44	192.168.60.93
00101100	No.45	192.168.60.94
00101101	No.46	192.168.60.95
00101110	No.47	192.168.60.96
00101111	No.48	192.168.60.97
00110000	No.49	192.168.60.98
00110001	No.50	192.168.60.99
00110010	No.51	192.168.60.100

Trouble shooting

Question 1: controller after electrify, indicator light is normal, but the lamps no 

effect change.

Answer: the reasons for this are the following:

(1) Please check lamps signal and controller have correct connection;

(2) If it is meet TTL signal, lamps and lanterns and controller must altogether, namely; the lamps GND (ground) to the GND and controller (ground) got together.

(3).Please check the effect file of SD card , the selected models whether current lamps and used the chip consistent.

 

Question2: After power, the T-1000S ERROR indicator has been flashing without 

display output.

Answer:The ERROR indicator has been flashing means the controller did not read the 

card correctly, possible problems:

SD card is empty, with no effect file;

The effect file in the SD card and the controller model are not match, please choose 

correct controller model in LedEdit and then re-create the effect file *led;

SD card did not format to FAT before copy effect files;

Please check the supply power voltage, the controller can be individually powered to 

exclude power reasons Changing the SD card and then test to exclude the possibility 

of a bad SD card.

 

Question 3: The controller is powered on, the indicator is normal, but the lamps have 

no effect change.

Answer: The reasons for this are as follows: 

Checking if the lamp′s signal line and the controller connected correctly.

If be received was the TTL signal,the lamp and the controller must be common 

grounding, that means connect the lighting′s and the controller′s ground wire together.

Check if the model chose during making display files on the SD card match the chips

used in the lighting.

 

Question 4:Controller  Connecting to the computer  but can’t work normally.

Answer: 

1).The IP address set to 192.168.60.178 

2).Check the controller's ip address is 192.168.1.1

3).Check the network cable is connected,Or whether produced in accordance with the

common standards of the network cable.

 

Package include:

T-200K

2G SD card

Adapter plug (US/EU/UK/AU)