Related Items -------------------------------------------------------------------------------------------------------------------

dmx 512 6 channel rgb led controller for 860W RGB led strip 

Specifications:

1.Input power:5-24v 
2.Contoller connected by wire 
3.Volt. output by channels,6ch,12ch choiced 
4.DMX512 
5.2 year warranty 

1.Introduction:

Welcome to use the 6CH constant controller, which take advantage of advanced microelectronic control technology.

This technology changes the international fashion DMX512/1990 standard digital control signals into an

alog control signals.

There are 1 ~ 12 output channels; each channel can achieve 256 control levels.This constant decoder

is used when DMX512 control equipment control general LED lighting.

 

2.Products Performance:

1.Input Power: DC5V~DC24V

2.Maximum load current: 6A/CH×6CH

3.Maximum power load: 180W(5V)  432W(12V)  864W(24V)

4.Output gray level: 256

5.Input Signal: DMX512/1990

6.Output signal:6channels Constant PWM

7.Output DMX:6channels

8.DMX512 socket standard RJ45

9.Ethernet port and standard XLR-3 caron plug

10.Size: 173*100*50mm

11.Net weight:271g  Gross weight:330g

 

3.Basic functions:

There are6 output channels, can connect with single or RGB lamps;

0-100% dimming output, each channel 256 gray levels;

International standard DMX512 input protocol, address code set by DIP switches;

Wide voltage DC input DC5V ~ DC24V;

Each occupied by 6 DMX address.

 4.Structure drawing :                                                                                                   

Decoder to use:

The first DMX address setting:

The decoder set the address bit by coding switch,of which 1-7 is for setting the start address of the Binary numeric code switch of DMX512,the first one is the lowest position,the ninth one is the highest

Bit of address code can be set to 127.

DMX512 start address code is the sum of switches 1-8, at the same time turn downside of the code switch

ON set to "1"), then the value of the bit can be gotten;coding switch up (set to "0"), the value

of the bit is 0.

Example 1:

As the following Schematic 1, DMX512 start address is set to 37,encoding the No. 6,3,1 position on switch

dial to "1",others set to "0",then the sum of the switch 1-8 code value is 32 + 4 + 1,that is the DMX512 start address 37.

Example 2:

As the schematic 2, DMX512 start address is set to 166, encoding the no. 2,3,6,8 switch dial to "1", others

set to "0",then the sum of the switch 1-8 code value is 2 + 4 + 32+128 = 166,that is the DMX512 start address 166.

 

automatic operation mode when the no.10 switch is turned down.

Effect choicet(button switch no.1-4)

1,Dial no.1:autocycle                      

2 ,Dial no.2:colorful gradients

3,Dial no.1&2:scan left                  

4,Dial no.3 :scan right

5,Dial no.1&3:colorful chasing,

6,Dial no.2&3 :left accumulation

7,Dial no.1,2&3 :right accumulation

8,Dial no.4 :glint

9,Dial no.1&4 :jump

10,Dial no.2&4:scan back and forth

11,Dial no.1,2&4 :back&forth accumulation

12,Dial no.3&4 :gradient &chase

13,Dial no.1,3&4 :scan accumulation

14,Dial no.2,3&4 :scan accumulation

15,Dial no.1,2,3&4 :gradient &jump

Speed choice(button switch5-7)

1,Dial no. 5 :0.5s

2,Dial no.6 :1s

3,Dial no. 7 :1.5s

Schematic for System Connection:

Notes:

 a. This kind of controller works only under DC5V-24V, which is provided by the matched controllable main power, or else the controller will be damaged.

b. The UTP wire is connected hand in hand to make the cable, when two or more controller

connected.

c. The power supply should be off when connecting the electric wires, and it can be turned on

till making sure the wires are connected correctly and the indicator of main power in red is lighting.

d. Controller should work under the environment of adequately ventilated, dry, not corroded, no flammable gas and rust.

e.Please check the wires connection regularly so that the wires of aged, rust-eaten, and damaged insulation spacer can be replaced timely.

Simple troubleshooting and maintenance:

 

Payment&other remarks:

About the factory: