| Type 1:(3 KEY IR Remote Controller) - It is a brand new RGB LED strip controller, the top performance of similar products. You can easily change mode, speed, color and brightness by pressing 3 keys on its ultra slim body. It also has auto memorize function and can output up to 144 watts power. It's the best mate for your LED strips.
- 256-level PWM control mode
- Auto-cycle dynamic mode
- Speed and brightness adjustable
- Up to 144W power
- Auto memorize function
- Easy operate keys
- Ultra slim design
- Working voltage: DC 8-16V
- Max Output current: 3x4A
- Max Output Power: 144W
- Working Temperature: -30°~+75°
- Size: 42*12*3mm
Type 2:(24 KEY IR Remote Controller) - The remote controller has 16 different colored buttons and 4 different light control functions: Flash / Strobe / Fade / Smooth. Great for SMD LED light lamp strip.
- Easy connection and simplicity to use.
- Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through infrared remote control.
- Type: 24-Key Remote Controller.
- Supply voltage: DC 12V
- Output Current: 6A max
- Working Temperature: -20°-60°
- Connecting mode: common anode
- Control Box size: 5 x 3.5 x 2.2cm (approx)
- Remote controller size: 8.5 x 5.2 x 0.7cm (approx)
- Remote controller battery: 1 x CR2025
Type 3:(44 KEY IR Remote Controller) - 44-key infrared controller adopts the advanced micro control unit, it is used for LED light strip.
- Easy connection and simplicity to use.
- Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through infrared remote control.
- Type: 44-Key Remote Controller.
- 0utput: 3 channels.
- Input/Output: 12V.
- Output current: 3 x2A
- Output power: 12V: <72W.
- Working Temperature: -20°-60°
How to use: - 1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power.
- 2. Operation, you will receive infrared remote control in front of infrared receiver to ensure that there is no barrier between the remote control and receiving head
|
