Product Description:
 The controller is adopted 8 digital tube to show the modes of time and work. It adopts PWM dimmer electric.It matches the precise clock clip which can control the brightness and darkness of the light according to the time .When present time is same as the predicted time , the light will change as previous brightness. You can set 5 scenes during the 24 hours one day. By optional sensor, the controller can autocatalytically adjust the brightness of the light according to the brightness and darkness of the environment optical line.The controller can be used for the normal one.The controller works through the infrared remote controller, and operate easily.

Model number:JM-LK-TIME
Products name:Intelligent Light Sensor & Time Controlled Controller
● Supply voltage:DC12~24V
● Output:3 circuit
● Output current:4A/ch
● controller size:L122xW71×H25mm
● package size:L135×W80×H55mm
● Net weight:180g
● Gross weight:210g
● Static consumption:<0.24W
● Output power:12V≤144W;24V≤288W
● PWM signal class:256 level
● PWM signal frequency:325HZ
● Remote Control distance:>10M
● Time deviation:<5 seconds per month

   External dimension:

Connection description:
Power input interface(port 1):

Adopt the 5.5x2.1mm DC connector seat
Power input interface (port2):


Adopt the connector seat  with screw.
Infrared receiver interface and light sensor socket:

Adopt built-in infrared receiver, external light sensor
  Load output interface:
 
Adopt the connector seat with screw
Direction for use:
Time set
 

The controller is inputted precise time control chip.It can work precisely when you set the time. Before time setting you should referent the local time.After setting, the controller can restore automatically,and with the power off memory function.

1.when the controller is on, press the key of Time set    one time,the digital tube will be flash.The left 2 number is for hour, the right 2 number is minute .if the number is flashing that this parameters can be changed by the key of plus and minus.
2.Change the parameters though the key of plus and minus 
to make the time is the same as present time.(You had better set 1 minute faster than the present time , because you need time to set the other parameters)
3.When you set well,press he key “Time set”   again.shinning digital tube will be changed to the 2 number of hour.
4.Change the parameter by the key of plus and minus,
5.to make the number is the same as the present hour.
6.After setting the hour and minute,press the power key      to restore the data. The digital tube will be standby mode when you set out.The right 5 number of the digital dedicated the time. The time start to work after setting the hour and minute, the second starts from 0.

   
Time control function:
 Time control function is similar with the clock function. When the time of the present and set time are the same, the controller will change the brightness as you set. When cut off the power, this data will not be lost.
In time control mode, the digital tube of the last left one is 2 that show the controller is under the time control mode and will change the light according to the time. If the left number is not 2, you can press the key  to change it to be 2.The controller can set 5 scenes, each scene is including 2 parts of parameters:time and brightness:time and brightness.The way to set the scene:
1.when the controller is on,press the key  one time,the digital tube will be flash, there are three parts of it.The left one  is the number of the scene(the number is between 1-5),the middle 2 number is hour, the right 2 is minute.
2.Dedication shine parameter can be changed by plus and minus key
3.Press the Scene set  again, shinning digital tube will be change d, you can change the parameter, the hour range is 0-24(when you set 24 hour is not available),the minute range is 0-59.
4.The brightness plus and minus key of the controller or the brightness hot key to change the brightness, the present brightness is the present scene brightness, you can choose the brightness from 0-100%.
5.All the parameters are settled; press the power key to save the date ,the digital tube

will be standby mode when set out.When the setting suitable, press the key ,the parameter will recover the parameters.

Light controlled function:

  When the controller is on, press the light key  ,the first number of the digital tube is 1 that is the controller is under the light control mode, At the same time controller can change the darkness and brightness according to the environment optical line.
   
   The environment optical line is dark the light will be bright, when the environment optical line is bright will be dark. When the controller leave the factory you can optical line sensitivity of the induce.
   
   The environment of high light intensity fluctuations, in order to prevent the light change its brightness with the light fluctuations, we had set 5 minutes for the light sensor adapt time, it means that when testing the light sensor function, the effect will not be seen until 5 minutes.

Brightness adjust function:

When the controller is on, press the brightness hot key on the controller to enter the light adjust mode. When the first number of the digital tube is 0 that is the controller can change the light according to settled brightness.
With power off memory function. When re-connect to the power supply, it will be the statue that you set before cutting the power supply supply automatically.

Typical applications:
This controlled is used to controlled the single color strip,can connect 3 pieces single in parallel, its DC12-24V , 4A/CH, "COM" is the Common +,CH1/CH2/CH3 is three - Port.

    

Common Problems: 

Cautions:  

1. Supply voltage of this product is DC12V~24V, never connect to others or AC220V. 

2. Lead wire should be connected correctly according to grade that connecting   diagram offers.

3. each channel 4A ,This product is not to overload;

4. Warranty of this product is two years, but exclude the artificial situation of damaged or overload working.