1.      T-100k System features

A.       32—256 grade Gray level?Support software Gamma correction?

B.       Support the rules and special-shaped handle.

C.       8 ports output?one port can support 512-1024 lamp pixels.

D.       On-line(also can SD Card) control ?offline control Can be multiple controllers used in combination, the contents of the line control program stored in the SD card.

E.       Compatible with single line or double line chips.

F.       If the controller to the lamps distance can choose photoelectric isolated transmission and as far as several distances of up to 200-300 M

 

NOTE?1. When T-100K controller control less than 512 lamps the frame rate can reach 30fps. When T-1000S control more than 512 lamps and less than 2048 lamps the frame rate will slow down automatically.

2. T-100K must use the new software LedEdit 2012.

 

 

  Physical parameters?

          Working temperature ?-30?—85?

          Working voltage?DC5V / DC7.5-24V

          Working power?1W

          size?L201mm×W164mm×H46   

    weight?0.35KG

          signal port?3pin connect port

Attention?

T-100K-B outline controller. if many controller be used at the same time, the first controller must inset a SD card with one file only?

Before copy files to SD card ?The SD card must be formatted as FAT format.

 

2.Support chips?

 

Chip type	Software code& Controller type	Lamps/(MAX)	Note
LPD6803,D705,1101,6909, 6912	T-100K-B-6803	8192 lamps
LPD8806,LPD8809	T-100K-B-8806	4096 lamps
TM1803,TM1804,TM1809,TM1812	T-100K-B-TM	4096 lamps	TM1804 and TM1809 are divided into high and low
TM1903?TM1904?TM1909?TM1912	T-100K-B-TM19	4096 lamps
UCS6909?UCS6912?UCS7009?UCS5903	T-100K-B-UCS32	4096 lamps
UCS1903?UCS1909?UCS1912	T-100K-B-UCS256	4096 lamps	Divided into high speed and low speed
UCS3903	T-100K-B-UCS1024	4096 lamps
DMX512	T-100K-B-DMX	1360/4096 lamps	Compatible with standard DMX512
WS2801,WS2803	T-100K-B-WS	4096 lamps
WS2811	T-100K-B-WS2811	4096 lamps	Divided into high speed and low speed
DS189	T-100K-B-DS189	4096 lamps
TLS3001,TLS3002?TLS3008	T-100K-B-TLS	4096 lamps
P9813	T-100K-B-P9813	4096 lamps
SM16715	T-100K-B-SM16715	4096 lamps	Divided into high speed and low spee
SM16716	T-100K-B-SM16716	4096 lamps
BS0901,BS0902	T-100K-B-0901	4096 lamps
BS0815	T-100K-B-0815	4096 lamps

NOTE: Chip is 256 gray level?each controller interface can control 512 lamps?

Chip is32 gray level?each controller interface can control 1024 lamps?

 

4.Definition of printing?                          TTL signal?245??

AC IN	+5V power input	COM(???)	GND(??)
POWER	Power indicator	DAT	Data signal
LINK	Link indicator	CLK	Clock signal
SPEED	Network indicator	NET	Network interface
ACT	Data exchange indicator	SD Card	SD card slot

NOTE?To TTL signal output?controller ground wire must connect with lamps ground wire.

 

7.Specific parameters?

  Memory Card?

          Type?SD card?if controlling so many lamps it is best to use the high-speed SD card.?

          Capacity?128MB—2GB

          Format?FAT

          Store file?*.led

 

Package include:

T-100K

2G SD card

Adapter plug (US/EU/UK/AU)