| Item Type: | Ballasts |
|---|---|
| Matched Tube: | T5 |
| Warranty: | 1Year |
| Model Number: | DR870E |
| Ballast: | Electronic |
| Features: | Protection function: over-temperature, overload, no-load protection |
| Power Factor Compensation: | Active |
| Unit Type: | piece |
| Package Size: | 15cm x 9cm x 6cm (5.91in x 3.54in x 2.36in) |
| Package Weight: | 0.25kg (0.55lb.) |
Quick Details
Specifications
US/EU Standard High-efficiency Energy-saving 70W Wide Voltage 85V-265V Electronic Ballast for G12, G8.5, RX7S, TT Lamp DR870E
This ballast are both suitable for using in European Countries and America Countries.
Description:
Product name: 70W Electronic ballast
Product model: DR870E
Power: 70W
Voltage: 110-240V, 50/60Hz
Operating current: 0.8A
Lamp Voltage: 90V
Service life: ≥30000 hours
Warranty period: Two years
Working environment: For indoor use, -25oC-50OC
Applied Lamp Type: G12, G8.5, RX7S, TT.
Suggest Applied lamp power: 35W quartz metal halide lamp, ceramic metal halide lamp, high pressure
sodium lamp, mercury lamp and some xenon lamp
Certificates: CE, FCC, RoHS
Weight: 0.25kg
Functional advantages:
1. Wide voltage input range: 85Vac-265Vac
2. Comprehensive energy-saving 35% (compared with electromagnetic ballast)
3. During the whole tube service life, lumen maintenance coefficient >90%
4. High-efficiency, high power factor (>0.98), low harmonic content (<10%)
5. Low-frequency square wave output, avoid audio resonance, clean grid environment
6. Electromagnetic interference resistant, no flash, no noise, with comfortable lighting effect
7. Protection function: over-temperature, overload, no-load protection
8. Most compact size, portable and small
Technology Specification:
Working principle: EN60929
Safety: EN 61347
Electromagnetic compatibility: EN55015 & EN61000&61547
Environment protection: EPA3050B & EN1122 & EPA3052 & EPA3060A & EPA7196 & EPA3540C & EPA8270C
Special notice:
1. Please read manual carefully before equipment installation. Please install in strict
accordance with installation diagram. Otherwise, the product will be burned.
2. Please pay attention to the working voltage and wiring position before wiring, to avoid
burning out equipment
3. To ensure the best working status of light source, this ballast should be matched with
corresponding tube.
4. When this product is working, the instantaneous voltage of its output terminal may be up
to 3KV. The power must be cut during tube installation and change.
5. Please take certain steps on rain-proof, moisture-proof and damp-proof during product
installation. And please insure that this product should be installed in the position with
enough capacity.
