500w fiber laser cutting control card laser welding control card Introduction to CNC2000 network card and wiring diagram

Quick Details

• Place of Origin: Hubei, China (Mainland)
• Brand Name: BXCLASER
• Model Number: BXC-10
• Application: Laser Engraving
• Laser type: fiber laser source
• Product name: laser control crad
• Wavelength: 1064nm/10.6um
• Output power: 50mw
• Material: Brass
• Name: laser control crad
• Power: 200w-500w
• Warranty: 1 Year
• Certificate: FDA

Packaging & Delivery

Packaging Details:	We use logs packaging, strong and reliable, sponge filled to prevent damage caused by the impact of the product
Delivery Detail:	5days

Introduction to CNC2000 network card and wiring diagram

CNC2000 network card up to the maximum number of simultaneous linkage axis 6 axis. Can be used for the 3 axis linear motion +3 axis rotation movement (X, Y, Z, C, A, B) or 6 axis rotation movement (6 joint manipulator) numerical control movement.

CNC2000 network cable CNC card outline drawing (four layer system board, positive, anti double-sided patch)

Main features of CNC2000 network cable NC card:

1 wire transmission, transmission speed, frequency can reach 20MHZ, long transmission distance, anti-interference, convenient connection.

2 by using the four layer circuit board design, power supply layer, to separate as two layers, each I/O are done in optocoupler isolation, better anti-jamming performance.

3 PCI interface mode in the future will be gradually eliminated, network cable control is the direction of development; network cable control does not require PCI slot, suitable for desktop, notebook and other computers.

4 as a result of the previous PCI card is not encrypted, the difficulties for the transfer, the network cable control CNC2000 CNC system will be encrypted from the beginning.

5 the pulse and direction signal output current of the digital control card can reach 50mA, which can drive two drives, and can be used for dual drive.

6 because PCI has dozens of feet connected with the host, there is a risk of poor contact or short circuit, network cable NC connection line less, improve the reliability.

7 directly at the bottom of the hardware to do complex acceleration and deceleration algorithm, faster than the PCI plus deceleration is more stable, the movement trajectory of the turning plus deceleration faster and more stable.

8 for the fiber laser, we have 2 D/A analog PWM output way, can the whole real-time control of laser power. The effect of welding and cutting. The uniform fiber laser can be used in the mainstream market (including QCW)

CNC2000 network cable control card wiring diagram

J1: network cable interface

J2 (20 feet), J3 (16 feet): input port

J4 (22 feet): output port

J5 (4 feet): external power port

J1: network cable port, a cable plug into the network cable port, the other end into the computer network cable port. Modify the computer's IP settings to achieve communication links, as follows:

CNC2000 network cable CNC card set to the computer network

192.168.1.166

255.255.255.0

Setting method: setting - network connection - local connection - Property - Double - click the Internet protocol (TCP/IP), the IP address is set to 192.168.1.166; subnet mask is set to:

255.255.255.0

Introduction to CNC2000 network card and wiring diagram

CNC2000 network card up to the maximum number of simultaneous linkage axis 6 axis. Can be used for the 3 axis linear motion +3 axis rotation movement (X, Y, Z, C, A, B) or 6 axis rotation movement (6 joint manipulator) numerical control movement.

CNC2000 network cable CNC card outline drawing (four layer system board, positive, anti double-sided patch)

Main features of CNC2000 network cable NC card:

1 wire transmission, transmission speed, frequency can reach 20MHZ, long transmission distance, anti-interference, convenient connection.

2 by using the four layer circuit board design, power supply layer, to separate as two layers, each I/O are done in optocoupler isolation, better anti-jamming performance.

3 PCI interface mode in the future will be gradually eliminated, network cable control is the direction of development; network cable control does not require PCI slot, suitable for desktop, notebook and other computers.

4 as a result of the previous PCI card is not encrypted, the difficulties for the transfer, the network cable control CNC2000 CNC system will be encrypted from the beginning.

5 the pulse and direction signal output current of the digital control card can reach 50mA, which can drive two drives, and can be used for dual drive.

6 because PCI has dozens of feet connected with the host, there is a risk of poor contact or short circuit, network cable NC connection line less, improve the reliability.

7 directly at the bottom of the hardware to do complex acceleration and deceleration algorithm, faster than the PCI plus deceleration is more stable, the movement trajectory of the turning plus deceleration faster and more stable.

8 for the fiber laser, we have 2 D/A analog PWM output way, can the whole real-time control of laser power. The effect of welding and cutting. The uniform fiber laser can be used in the mainstream market (including QCW)

CNC2000 network cable control card wiring diagram

J1: network cable interface

J2 (20 feet), J3 (16 feet): input port

J4 (22 feet): output port

J5 (4 feet): external power port

J1: network cable port, a cable plug into the network cable port, the other end into the computer network cable port. Modify the computer's IP settings to achieve communication links, as follows:

CNC2000 network cable CNC card set to the computer network

192.168.1.166

255.255.255.0

Setting method: setting - network connection - local connection - Property - Double - click the Internet protocol (TCP/IP), the IP address is set to 192.168.1.166; subnet mask is set to:

255.255.255.0