A way (10K) NTC temperature sensor inputs (temperature: -50  ~ 120  B two normally open contact output C temperature control heating temperature display D E F temperature deviation correcting power-down memory function protection

 

The main function

    All the way (10K) NTC temperature sensor inputs (temperature: -50 ~ 120 )
    Two normally open contact output
    temperature display
    Heating thermostat
    Temperature deviation correcting function
    Power off memory protection

Parameter Description

 
Code Parameter Setting range Default value Job Description
1-H values along the heating temperature -45 ~ 110 60
1-P thermostat all the way back to the lower limit of the difference between 1 ~ 30 3
2-H Road heating temperature value -45 ~ 110 50
2-P Road back to the lower temperature difference between 1 ~ 30 3
SC measured temperature deviation correction -15 ~ 15 0

Technical Parameters

 
 Packing Checklist 1. Host 2.NTC (10K) temperature sensing line 3. Instructions
Dimensions (mm) length 91 × width 40 × height 52
Installation and dimensions (mm) controllers are available with DIN rail mounting or fixed installation, the distance between the two mounting holes 84 mm
Net Weight: 0.160Kg
GW: 0.2Kg
Power supply and power consumption AC (90 ~ 250) V, 2W
Use of the environment -10 ~ 50
Display three LED digital display
Push-button membrane keypad
Enter all the way (10K) NTC thermistor temperature sensor input, measuring range -50 ~ 120
1. Two relay output normally open contact temperature output.
2. Each contact current capacity resistive load 5A, inductive load 1A. Controllable electric heating 1000W or 200W motor or water pump, the greater the load required AC contactor expansion.
Measuring range -50 ~ 120
Setting range -45 ~ 110
Control range -45 ~ 110
Other parameters 1. Temperature sensor signal line may extend over long distances using an ordinary wire, the effective range of 100 meters. 2. Set parameters holding down long-term memory 3. The temperature hysteresis in the 0 ~ 30 .