| Motor Type: | DC Motor |
|---|---|
| Unit Type: | piece |
| Package Size: | 10cm x 10cm x 5cm (3.94in x 3.94in x 1.97in) |
| Package Weight: | 0.2kg (0.44lb.) |
Quick Details
Specifications
1. with the abnormal overload protection and current protection function
2. Speed can be adjusted by VR port. Speed control mode: one is voltage control: give VR port input 0 to 5v voltage.
3. Has the locked-rotor protection function, if Motors can not start within 5s repeatedly, module will stop output. Adjust voltage VR port to 0v or power off, the protection status can be removed
4. The function of the speed pulse signal output, M port, read the rotational speed of the machine. Depending on the motor each circle of the output pulse number is different.
5. Enable function, EL port, High level (5v) motor work, low level (0v) motor stop.
If motor less than 60W, not need heat sink, more than 60W must be add heat sink, without heat sink will reduce the driving efficiency, the temperature is too high will bring permanent damage!
Working voltage: DC 36V-72V
Working current: ≤15A
Drive power: ≤700W
Speed regulating voltage: 0V-5V
PWM control of motor speed frequency: 1KHz--10KHz
Work temperature:-40---85℃
Work humidity: ≤90%RH
Size: 63MM*42.5MM*33MM (control port, hall port are 2.54 socket,motor terminal is 3.96 socket)
Wring
Power OUT
VCC (power +)
GND (power -)
MC (motor phase line W)
MB (motor phase line V)
MA (motor phase line U)
Package include
1 * 700W Brushless Motor Controller
1 * English instruction(By mail)