Package include:

 

· 1 x 6 Axis DDMM2.1 March3 CNC breakout Board

 

· 1 x Hand controller

 

· 1 x Toll sensor

 

· 1 x USB cable

 

· 1 x Parallel cable

 

· 1 x CD (CD include with English user manual)

 

1. Products brief introduction

 

DDMMV2.1, which name is short for “Digital Dream Multiple input Mach3 card Version 2.1”is a CNC system based mach3. This card is designed by our Studio You do not need to add other Hardware,and you can complete the signal conversion from the G-code to the movement of the stepper motor drive control. You should use both parallel port and usb port at the same time.This card is compatible with most stepper drives and servo drives. And it is perfect weapon to replace mach3 parallel interface board.

 

 

 

1) Computer system requirement

 

Basic Configuration:

 

1) CPU: 1GHz;

 

2) Memory: 512MB

 

3) 500MB Available disk space

 

4) USB 2.0

 

5) LPT port

 

Recommended configuration:

 

1) CPU: 2GHz Dual Core;

 

2) Memory: 2GB;

 

3) 1G Available disk space

 

4) USB 2.0

 

5) LPT port

 

 

 

2) Production appearance

 

 

1. USB communication interface, and power supply for the board;

 

2. LPT port for stepper driver signal.

 

3. 8 IO outputs ,opto-isolated;

 

4. Spindle outputs signal;

 

5. Hand control box port;

 

6. 6 axis stepper dirver signal output;

 

7. 15 IO input, opto-isolated, It Can be configured to limit the emergency stop and other functions.

 

8. Use STM32 chip as a Master ;

 

3) Detailed functional introduction

 

A. Operating voltage of input interface: 12V;

 

B. Operating voltage of output interface: 12V;

 

C. Stepper motor control signal output voltage: 5V;

 

NOTE: The marked as “Power In” is Power input interface, you should connected correctly.

 

 

2.Mach3 Manual Control Box V1.1

 

  

 

Mach3 Manual Control Box is a hand control box designed for mach3.It’s a box connected to Mach3 main Controller.Most instructions of Mach3 can be issued by this box.This box should be used with mach3 controller card DDMMV2.1.

 

 

 

1)Specfication

 

1. Comunicate with mach3 controller card by RS232

 

2. procedure control botton:START/HOLD/STOP/RESET

 

3. Jog botton:XYZABC 6 axis’ up and down

 

4. FRO,SRO,SJR setting botton

 

5. Other botton: like Home,Goto zero,Rewin Spindle run/stop

 

 

 

 

 

Shipping

 

· Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately

 

· We ship to worldwide

 

· When you buy 1-2pcs we usually ship by Hongkong Air Post which will take round 10-15 business days. some areas may be later due to variation of postal service in different areas,if above 3pcs we can ship by DHL/UPS/EMS which need confirm by us

 

· All items will be shipped within 1-3 business days upon receipt of payment

 

Payment

 

· We accept credit card,bank TT,western union,Moneygram,etc

 

· Payment must be made within 48hours of the auction end time

 

· Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.

 

Refund

 

· When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.

 

· Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost.

 

Contact us

 

· Welcome worldwide customer inquire and questions,we will try to do our best to feedback customer's email within 1-2 business days,if not pls check the mail box again.

 

· Customer's satisfaction is very important to us.