| Motor Type: | Stepper Motor |
|---|---|
| Model Number: | M542H |
| is_customized: | Yes |
| Unit Type: | piece |
| Package Size: | 32cm x 28cm x 8cm (12.60in x 11.02in x 3.15in) |
| Package Weight: | 0.45kg (0.99lb.) |
Quick Details
Specifications
CNC Stepper Motor Driver Board Controller M542H 1.0A-4.5A
Descriptions
The M542H Stepper Driver Board Controller is a high performance microstepping driver based on pure-sinusoidal current control technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, so the Nema17--Nema34 stepper motors with a 1.0A-4.5A current will be suitable.
Click here for the specification of M542H
Features
High performance, cost-effective
Supply voltage from 20V DC to 100V DC
Output current from 1.0A to 4.5A
Self-adjustment technology, full to half current self-adjustment when motors from work to standstill via switching off SW4
Pure-sinusoidal current control technology
Pulse input frequency up to 300 KHz
TTL compatible and optically isolated input
Automatic half-current reduction as long as switching off SW4 when motors stop
16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
Suitable for 2-phase and 4-phase motors
Support PUL/DIR and CW/CCW modes
Short-voltage, over-voltage, over-current and short-circuit protection, protect the PC, motors, driver etc from being damaged
Applications
Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y tables, labeling machines, laser cutters, engraving machines, and pick-place devices
Suitable for a wide range of stepping motors, from NEMA size 17 to 34
For processing various pattern mould
For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc.
For carving portrait, scenery, handwriting, sealing, etc.
DIP-Switch Settings
I. DIP-Switch Instructions
II. DIP-Switch Settings Diagram
Power supply Recommend:
36V DC power supply for Nema 17 stepper motors
48V DC power supply for Nema 23/24 stepper motors
60V DC power supply for Nema 34 stepper motors
Interface Instructions
Connection Diagram
| Electrical Specification (Tj=25°C/77°F) | ||||
| Parameter | M542H | |||
| Min | Typical | Max | Unit | |
| Output Current | 1 | - | 4.5(3MS) | A |
| Supply Voltage | +20 | +50 | +100 | VDC |
| Logic Signal Current | 7 | 10 | 16 | mA |
| Pulse Input Frequency | 0 | - | 300 | KHz |
| Isolation Resistance | 500 | MΩ | ||
| Operationg Environment & Other Specifications | |||||||||||
| Cooling | Natural Cooling or Fan Forced cooling | ||||||||||
| Operating Environment |
| ||||||||||
| Storage Temperature | -20 °C ~ 65°C (-4°F ~ 149°F) | ||||||||||
| Total Weight | 370G | ||||||||||
1 x CNC Stepper Motor Driver Board Controller M542H (1.0A-4.5A)
1 x CD (User Manual)
