Product Main

Quick Details

Motor Type: Stepper Motor
Model Number: CNCUSB (MK2)
Name : CNCUSB (MK2) Control Board
Port: USB port
Input Voltage : 5v
Operating system: Vista , WIN XP, WIN 7, WIN 8
Axis: 3 Axis 4 Axis 5Axis maximum 9Axis
Unit Type: piece
Package Size: 20cm x 10cm x 8cm (7.87in x 3.94in x 3.15in)
Package Weight: 0.6kg (1.32lb.)

Specifications

-1

 

1 x USBCNC DIY MK2 Control board

1 x USB Cable

 

 5

 

e

 

1. Products introduction :

 

  • This is  DIY USBCNC MK2 Control board, it is wiring much easily than official one. It just can use the official July 31, 2013 software (we also can send it to you), It can not be upgrade and downgrade firmware. Software features is same as official one, but can only use this version. 

 

 

2. Advantage:      

 

  • 1, Maxium control is 9 Axis, maximum frequency is 100KHZ, can be used for servo motor.

  • 2, 7 output points

  • 3,5 input points, you can add start, stop, knife,

  • 4, it can contact the hand wheel outside.

  • 5, it can make lathe spindle encoder thread

  • 6, there hss software for limited

  • 7, it can be offline opetation with outside SD card

  • 8, can be carved uneven PCB

  • 9, can be digitally capture

  • 10 API

  • 11 may be positioned camera

 

 

9

 

 

3. Features and Specifications:

 

  • 4-axis motor signal is teriminal ,it is easy to connect , output is also terminal plug. Increase the PWM, it can connect VFD directly , increasing the SD card, increasing the reset button, outside hand wheel leads to the start signal. More convenient and practical.

     

  • According to the official installation method to install software (NET35, DX9, drive, 2013,7,31 version of the software), and finally putting the no registering files to copy to the installation folder. After copying to the control board, it does not be registered .

 

 

8

 

 

 

 

Shipping terms:

Our products are sold worldwide.

But if your country is more difficult to transport goods, please contact us in advance to confirm shipping cost.

 

Payment:

We accept paypal credit, bank transfer, western union etc. 

Payment must be made within 7days calendar days of the auction end time.

 

Problem and Feedback:

Please give us the opportunity to resolve any problem, we will try our best to help you.

Your satisfaction is very important for our store, so please contact us before you want to leave a negative feedback. 

Thanks very much in advance.

 

 Refund:

If you are not satisfied with our package like the products is damage, please do not sign it and contact us immediately.

If it is possible, please take some photos or make a small video about it. It will help us to solve the problems.

 

Note:

We can produce the product according to our customer's design. 

If you need something is very special, please contact us about it.