| Motor Type: | Stepper Motor |
|---|---|
| Unit Type: | piece |
| Package Size: | 8cm x 5cm x 5cm (3.15in x 1.97in x 1.97in) |
| Package Weight: | 1.0kg (2.20lb.) |
Quick Details
Specifications
Support for all versions of Mach3, only for the Windows operating system to support spindle speed feedback function Ethernet interface without the need to install drivers, all versions of Windows plug and play. In Mach3, the Ethernet cable is pulled out and plugged in. Support up to 6 axis linkage, including point motion of the 6 axis linkage.
Product features
1 supports all versions of Mach3, only for Windows operating system, only supports Ethernet interface, the need to use IP address settings.
2 support spindle speed feedback function
3 support power resume function
4 supports a maximum of 10 meters Ethernet cable, without the need to install the driver, plug and play;
5 support up to 6 axis linkage, including the point of action of the 6 axis linkage. (depending on the model, the number of supports is different)
6 with 2000KHz pulse output, support differential signal output, support servo / stepper motor.
7 has the status indicator lamp, may prompt the connection status, the Mach3 connection status, the movement, each kind of condition is clear.
8 has a total of 16 input ports, the output port of the, which supports the input and output ports of all IO ports
9 support the spindle PWM speed output; support spindle pulse + direction output;
10 support spindle 0 to 10V analog voltage output.
11 184x127x30 mm, aluminum enclosure, shielded interference, stable and reliable.