| Motor Type: | Stepper Motor |
|---|---|
| Model Number: | 4 Axis |
| Unit Type: | piece |
| Package Size: | 15cm x 23cm x 5cm (5.91in x 9.06in x 1.97in) |
| Package Weight: | 1.0kg (2.20lb.) |
Quick Details
Specifications
JMC-2410
Summary:
JMC-2410 is a PCI interface 4 axis motion control card, use a special motion control ASIC chip, support board ID set, dynamic modify the target location, support for asymmetric acceleration and deceleration.
The encoder signal can be received and provide a position lock function, and can be interrupted to support the location of the comparison (greater than, equal to, less than) the function, when compared to the conditions can produce a more output signal, and can generate interrupt.
Specifications:
1.32 PCI 32MHz3.3/5.0V Peugeot protocol
2 single card can control 4 axes
3 maximum pulse output frequency PPS 5M. Support T type speed curve
4.S type velocity curve acceleration / deceleration
5 support to run the change in speed (Flight Acceleration / deceleration)
6 support asymmetric acceleration and deceleration
7.28bit position counter, technology range: TO -134.217.728
+134.217.727
8 built in the location of the comparator, the conditions are met can be interrupted, and support the comparison
Output
9 support interrupt function
10 support position lock can be generated interrupt
11 support for any two axis linear interpolation
12 support encoder input
13 limit switch, origin switch, index signal, INP.ERC.
ALM has a dedicated I/O interface
14 support plate number setting, the same system can support 16 boards
15.20 open collector non isolated digital output (DO)
16.20 digital input (DI).
Application range:
1. semiconductor related production equipment
2.SMT related production equipment
3.LCD related production equipment
4. laser processing equipment
5. machine vision and automatic test equipment
6. biomedical automatic detection and processing equipment
7. industrial robot
8. special numerical control equipment
Software support:
1.OS supports WINDOWS2000, WINDOWSXP,
XPE WINDOWS
2.DLL dynamic link library for the development of customers two
3. provide MOTIONPANNEL, can be in the development phase to debug
Control system
4. support the use of VISUAL, BASIC C/C++ for motion control
Process development, and provide routines