USB CNC cncusb 3 4-axis Mk1 USB CNC USB hand control board

 

 

Specifications:

 

The interface board has been revised many times, now is very stable and reliable without external power supply, increase the 5V regulated power supply module, using active crystal, won't appear software dropped, step motor step off, notebook battery can also be normal work.

Use 40 foot row insert single chip microcomputer, maintenance and replacement.

All use HT3.96 socket, wiring convenient.

The 3 output is directed, there is a direct control of the relay device.

Complete isolation can control the inverter.

An external manual interface, it is convenient to take over the control box.

Increase the power of self recovery insurance, protect the computer.

7 diodes, 10 electrolytic capacitors, 104 capacitor 7, 103102 one, 4700P/250V capacitor two are in order to stabilize.

The latest version of the software:

Can use plasma

You can use the 3D printer

You can use a man to export G code

Functional (set of regulated power supply, inverter spindle speed control, convenient wiring seat, external limiting, external tool, external origin. External I2C. external connection, external emergency, external reset, external relay, output instructions, work instructions, reset button, upgrade button, convenient, easy to use, easy to upgrade, use no limit. The price is low, the disc has detailed information.)

 

1.Works on MacOS X (Snow Leopard 10.6.3) with virtual machine emulating Windows XP SP3

2.USB (V2.x) from PC/Laptop running Windows XP, Vista or Windows 7 (32 bit or 64bit)

3.Motor driver connector pin-out is compatible with 10 pin open source interface (Linistepper, PICStep)

4.controller works with most step/dir stepper and servo motor drivers available on the market

5.buffered IO for maximum performance

6.advanced interpolation algorithms

7.start, stop, pause and resume execution of program on your machine

8.standard RS274/NGC G-code (EMC2 compatible)

9.advanced G-codes - G40, G41, G42 (Cutter Radius Compensation) supported

10.advanced G-codes - G43, G49 (Tool Length Offsets) supported

11.advanced G-codes - G54, G59.3 (Coordinate System Origins) supported

12.tested with SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM ... generated G-code

14.Profili 4-axes and 3-axes G-code supported

15. import toolpath from DXF files

16.import toolpath from PLT/HPGL files

17.import toolpath from image files

18.import toolpath from NC-Drill (Excellon) files

19.import toolpath from Gerber (RS-274X) files

20.toolpath simulation

21.automatic homing procedure

22.advanced toolchange procedures

23.automatic tool length measuring

24.export toolpath to G-code

25.export toolpath to DXF

26.SDK (software developers kit) is available

27.25 kHz maximum step frequency

28.3 digital outputs (flood, mist, spindle)

29.12 us minimum pulse width

30.manual jog inputs for all axes

31.limit inputs for all axes

32.control external devices with I2C protocol

 

 

Features:

 

You can run on XP Vista, Windows, or 7Windows PC 8 (32 bit or 64 bit Windows / laptop USB interface (2.x version))

Can be used in the market pulse / direction stepper motor and servo motor drive

Output input as the highest performance buffer

Advanced interpolation algorithm

Can start, stop, pause and resume your computer on the execution of the program

G RS274/NGC code (EMC2 compliant)

Supports advanced G- code - G40, G41, G42 (tool radius compensation)

Advanced G- code - G43, G49 (tool length compensation)

Support for advanced G code - G54, G59.3 (origin of coordinate system)

Supports 4 axis and 3 axis G code

You can import the tool path from the DXF file

You can import the tool path from the PLT / HPGL file

You can import the tool path from the image file

You can use the numerical control drill tool path file

Tool path simulation

Advanced tool for the exchange program

Automatic tool length measurement

Provide SDK (software development kit)

Can be externally defined key power

Can cut foam

The maximum frequency of 25 kHz

3 digital output (flooding, fog, spindle)

Minimum pulse width 12

All axes can be manually

All shafts can be connected to the limit

I2C protocol for controlling external devices

 

 

Package List:

1 * 4 Axis USBCNC 2.1 Substitute MACH3 Interface Board ---- MK1