The software will be sent  by internet!!

 

 

Detailed Product Description

1) Basic configuration: 3 motion axes; and can be further extended by switch value;
   input points and switch value input points; and an analog output. These   configurations may be different with different manufacturer’s choice.
2) Support CNC rotary- turret (There may be difference for different version)
3) Automatic process; completely supports G order, HP PLT format, DXF format

   and JDPaint ENG format; compatible with CAD/CAM software, such as UG, Pro/E,
   MasterCAM, Cimatron, CASMate, ArtCAM, etc.
4) Manual function, including control modes of serial, step, and handwheel;user is
   allowed to control the machine tool not only by input equipment of machine tool but
   also by input equipment of computer, such as keyboard and mouse.
5) Machining function of array; execute a processing procedure repeatedly

   according to user’s appointed numbers of row and column of the array.
6) Rotary-image machining function; the function takes the origin of workpiece

   to be the center and carries out machining of rotary image.
7) Stepping function; it is convenient for user to set accurate feed length;

   the step-size can be agilely adjusted.
8) Function of manual data input (MDI); user can directly input G code by

   online and immediately execute it.
9) Advanced processing instruction; input several simple parameters, and you

   can complete functions of milling bottom or marking edge.
10) Single block mode; Customer can set the machining task to be executed as

    single block mode, thereby, it will provide a good support for fault diagnosis and
    malfunction restoring.
11) Advanced automatic functions of breakpoint resume and program jump  execution.
12) The function of feeding axis backs to the machine reference point  accurately.
13) Auto calibration; provides user with the functions of fixed calibration,floated
    calibration, automatic midsplit, etc.
14) Function of preserving/resuming the machining state; the system has well taken   into consideration the power breaking problem which commonly occurred to users in
southern China; system will not cause any damage to the file although power breaking; functions of breakpoint resume and backing to the machine reference point can fully guarantee the dependable instauration after restart.
15) Feedrate online adjustment; user can adjust the feedrate at any time in machining
    process from 0 %( the smallest) to 120 %( the biggest).
16) Add new function for high-smooth speed connection algorithm. In a usual NC
system, connection speed between two G codes commonly is a fixed value (e.g.,it
may be 0 or a certain small value). However, in new version of NC system, it adopts
a particular machining speed adaptive prediction algorithm. In accordance with speed value, direction, maximum acceleration, and the function of forward prediction, the algorithm adaptively decides the connection speed between the current instruction and the next instruction. It has greatly increased the processing efficiency (efficiency enhancement ranges from 30% to 300%), improved the processing capability, and eliminated the speed chatter marks left on the processing surface.
17) Three-dimensional simulation display; with simple operation, you can observe the
     machining result of three-dimension, which helps you know the machining result    more accurately and more intuitively.
18) Function of simulation; this function can simulate machining process and will finish
in a short time. Meanwhile, it can check if there is any mistake with the program and
if the processing result can meet user’s satisfaction. Moreover, it can count precisely
the actual processing time.
19) Strong and agile keyboard operation. To satisfy user’s need, we offer a strong
support to the keyboard operation.
20) Log function; system has a strong Log function which is very helpful for user to view the detailed processing information and system diagnoses.
21) Enclosed files manager; what the user needs to do is to save the processing file into a specified directory; NcStudio™ will administrate these files in the enclosed

file manager.
22) Enclosed files editor; user can load the processing procedure to the editor to edit
     and modify.
23) File machining information; with simulate or actual machining, window for file
     machining information can help user to count the file running time and the range of
     machining, etc.
24) PCI BUS motion control card.

 

*****************************************************************
Package List:

1. mainboard

2. breakout board

3. Parallel cable

****************************************************************
Packaging Details
Unit Type:piece
Package Weight:0.6kg
Package Size:20cm x 15cm x 6cm