Model Number: | FDK+TB6600 |
---|---|
Motor Type: | Stepper Motor |
Unit Type: | Set |
Package Size: | 25cm x 18cm x 10cm (9.84in x 7.09in x 3.94in) |
Package Weight: | 1.1kg (2.43lb.) |
Quick Details
Specifications
This USB motion control card has the below advantages: small volume, easy to use, has a strong anti-interference ability, No need to install any USB drivers,it can be used after plugging in the computer. ,suitable for all versions of Windows. Fully supporting all Mach3 versions.
-
mach3 4 Axis USB CNC Controller card 100KHz
1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
3. Support automatic probe tool
4. Support Emergency input
5. Support for limit switch
6. Support for connecting electronic handwheel
7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;
11. 1 status LED, indicate connection status on the board.
-
2DM542 Driver description:
1. Parameter auto-setup and motor self-test
2. Multi-Stepping inside,Small noise, low heating, smooth movement
3. Torque compensation in high speed
4. Variable current control technology, High current efficiency
5. Accelerate and decelerate control inside, Great improvement in smoothness of starting or stopping the motor
6. Support PUL/DIR and CW/CCW modes
7. Storage the position of motor
8. Optically isolated input and compatible with 5V or 24V
9. Automatic detection, flexible selection of pulse edge count mode
10. Green light means running while red light means protection or off line
- 1 x mach3 4 Axis USB CNC Controller card 100KHz
- 4 x 2DM542 stepper motor driver
- 1 x USB cable
- 1 x CD (include with English user manual and mach3 software)