| Motor Type: | Stepper Motor |
|---|---|
| Unit Type: | piece |
| Package Size: | 15cm x 15cm x 10cm (5.91in x 5.91in x 3.94in) |
| Package Weight: | 0.72kg (1.59lb.) |
Quick Details
Specifications
top gradeCNC mach3 usb 4 Axis Kit, 4pcs TB6600 1 Axis Stepper Motor Driver + mach3 4 Axis USB CNC Stepper Motor Controller card 100KHz
package includes
1 x mach3 4 Axis USB CNC Controller card 100KHz
4 x single Axis TB6600 stepper motor driver
1 x USB cable
1 x CD (include with English user manual and mach3 full version software)
product description
This USB motion control card has the below advantages: small volume, easy to use, has a strong anti-interference ability, No need to install any USB drivers,it can be used after plugging in the computer. ,suitable for all versions of Windows. Fully supporting all Mach3 versions, including the Mach3 R3.043.066 version.
mach3 4 Axis USB CNC Controller card 100KHz
1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
3. Support automatic probe tool
4. Support Emergency input
5. Support for limit switch
6. Support for connecting electronic handwheel
7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;
11. 1 status LED, indicate connection status on the board
Support USB;
10 ports photoelectric isolated input interface for ordinary digital data;
3 ports photoelectric isolated output interface for ordinary digital data;
1 port 0-10V spindle speed analog output interface(can change to PWM outputcan support 3-6 axis stepper systems,100KHz pulse output for every axis;
ARM motion control chip;
Compatible with MPG input,support the digital display MPG from our company.
Products Appearance and size
Product connection define and method
No.1 terminal block is 4 axis stepper driver control output interface,
from left to right,there are X,Y,Z,A,,B,C4 axis output, it’s common anode,the cable connection for
each axis is COM+/CP-/DIR-, COM is common+ ,CP is Pulse-, DIR is direction-.Connection
The port marked 2 is Common IO output interface. IncludeOUT2\GND\OUT3\GND from down to up,open drainoutput
?Now just make a switch between OUTX(X=1-3) and GND,to control the relay output,.External power supply need to accord with the relay specification,the
internal optocoupler GND open circuit only can absorb less than 50mA current,if relay absorb the
current over 50mA,pls add current amplifier. In the Figure connect with OUT3,the others similar
It you want to use the single-terminal MPG (namely there is no A-B-MPG), please
look at the wiring table, As for the unlisted one, please take the
differential MPG wiring mode.
When you purchase our product, we will supply a CD-ROM, which contains the MACH3
installation, registration, and USB plug-ins
?Payment
if you have any problems of payment please contact us!
if you need to buy more goods but the price isnotvery cheap please contact us!
Warranty
All products have been checked and packaged in good condition before dispatch.
ALL peoducts have 1yeas warranty.
If you are not satisfied with our product and service.Please contact us first before giving a non positive feedback or dispute.we will try to our best solve the problems
