| Model Number: | Encoder 360 P/R Voltage |
|---|---|
| Brand Name: | ToAuto |
| Motor Type: | DC Motor |
| Unit Type: | piece |
| Package Size: | 20cm x 15cm x 15cm (7.87in x 5.91in x 5.91in) |
| Package Weight: | 0.38kg (0.84lb.) |
Quick Details
Specifications
NEW 360P/R Voltage Output DC5~24V AB 2ph Shaft 6mm 1500rpm Photoelectric Rotary Encoder+1.5M Cable
Encoder 360 P/R Voltage
Specifications
| Project | Encoder |
| Exterior | φ38×35.5mm |
| Shaft Diameter: φ6mm | |
| Axis stopper platform: High 5mm, 20mm | |
| Resolution | 360 pulses / rev. |
| Output signal form | A · B two-phase |
| The maximum mechanical speed | 1500rpm |
| The response frequency | 20KHZ |
| Supply voltage | DC 5V ~ 24V |
| Output Type | Voltage Output |
| Wires length | 150cm |
Features:
- Light weight and small size.
- By rotating the grating disk and optocoupler direction which generate counting pulses.
- Easy installation.
- Fits for measuring the rotational speed of the object , angle, acceleration, and length measurement.
Output:
AB two-phase quadrature output rectangular pulse ,the circuit output is NPN open collector output type ,the output of this type can and with internal pull-up resistor is directly connected MCU or PLC ,such as 51 single or for Mitsubishi PLC (PLC input mode should be connected to 0V switch function ).
Note: If the encoder is not connected to the device can not be directly oscilloscope oscilloscope ( open collector output without pull-up resistor when there is no voltage output ) If you want the oscilloscope in AB two-phase output with two pull-up resistors.
Fitment:
Suitable for a variety of intelligent control displacement measurement ,automatic fixed-length automatic guillotine paper machine,steel cut length control ,civilian measured height human scale,students racing robots.
Wiring Output : A phase, B phase, Vcc positive supply, V0, the shield wire.
Connection: Green = A phase, white = B phase, red = power +, black = power -
Note: AB two -phase outputs must not be connected directly to VCC, otherwise, they will burn the output transistor.
There are many shops,why you choose us?
