1 PCS x 3 Axis MACH3 USB Motion Control Card 1Mhz

Feature:

• 1. Supports all Mach3 versions, including the Mach3 R3.042.040 version.

• 2. Supporting Windows series, no need to install any USB drivers and plug.

• 3. Full support for USB hot-swappable, the card is Monitoring USB connection status at any time.

       Under the operation of Mach3,it can be reconnect automatically after disconnect.

• 4. Supports 4 axis linkage,including point to point move.

• 5. Supporting auto tool zero,electronic handwheel and software limit,return difference

        eliminating.

• 6. 120M working frequency, Maximum step-pulse frequency is 1MHz, Perfectly drive servo and

        stepper motor in three ways: pulse / direction, CW / CCW, AB quadrature output.

• 7. Status indicator LED can be useful to show the USB connection, and working status by

        flashing.

• 8. 16 general-purpose inputs, PNP or NPN input status can be configured in Mach3.

• 9.  8 electronic switch outputs. Darlington open-drain output.

• 10. Measures real-time spindle speed (Support the Hall element and quadrature encoder speed

        masurement , etc.) and spindle speed can be observed in March3 to perfectly support the

        application of spindle. Perfectly support the lathe spindle applications and other occasions,

        whitch requires precise spindle speed.

• 11. Use external 12V-24V DC power supply to isolate USB and external port,and to make the

        system more stable.

• 12. 11 high-speed optical couplers with 10MHz, and 24 general optical couplers(Total optocoupler

        reach to 35 )for isolating all of the input/output signals, isolation voltage up to 2KV

• 13.  2 spindle export interface: accurate 0-10V analog output, supporting converter to control

        spindle drive; PWM output with 5V drop-down , providing PWM speed drive,CW/CCW

        output,puls/dir output and quadrature output for servo or stepping driver.

• 14. The output spindle can be configured into any axis of the 4 shaft through the software.

• 15.  2 external adjustment-knob to adjust the processing speed ,spindle speed and manual mode

        processing speed.

• 16. The 4 layers circuit board selected high-quality devices is exquisite.

Operation Instruction: 

 

• 1. Setup Mach3 Software

• 2. Configure Mach3 Software

• 3. Setup motion control card hardware

• 4. USB motion control card pin function Descriptions

• 5. USB motion control card connection Diagram

• 6. External adjustment-knob

• 7. Spindle speed PWM output

• 8. Measure the rotating speed of the spindle

• 9. Auto tool zero

• 10. Electronic handwheel

• 11. I nterpolation coefficient setting

• 12. Version update records