| Motor Type: | AC Motor |
|---|---|
| Model Number: | DSE704 |
| power supply: | 8 to 35 vdc continuous |
| start output: | 1.2 amp dc at supply voltage |
| fuel output: | 1.2 amp dc at supply voltage |
| auxiliary output: | 1.2 amp dc at supply voltage |
| charge fail: | 12v=8v cf 24v=16v cf |
| Operating Temperature: | 60 Degree |
| Condition: | NEW |
| Performance: | Excellent |
| Unit Type: | piece |
| Package Size: | 20cm x 15cm x 15cm (7.87in x 5.91in x 5.91in) |
| Package Weight: | 1.0kg (2.20lb.) |
Quick Details
Specifications
DSE704 dse generator control module 704
Application
The controller 704 can be utilised as a Manual or Auto Start Module for single gen-set applications or engine only applications. The module has been designed to work with electronic and non-electronic engines, providing advanced engine monitoring and protection features.
Description
*The Module lc704 has been designed to monitor engine temperature, low oil pressure fail to start,charge failure, over speed and under speed.
*Automatic mains (utility) supply monitoring
*Automatic shutdown when fault conditions are detected
*Manual start
*Engine pre-heat
*Engine monitoring and protection features
*Protected solid state (PSS) outputs
*Front panel mounting
*Front panel programming
*Remote start
*LED indicators
*Configurable timers
*Configurable outputs
*ransfers between mains (utility) and generator power
* On-site module configuration to match user requirements
* Multiple engine parameters are monitored simultaneously
Technical data
| Power Supply | 8 to 35 Vdc Continuous |
| Cranking Dropouts | Able to survive voltage dips during cranking. Without |
| the need for internal batteries. | |
| AlternatorInputRange | 15 - 305 V AC RMS (+20%) |
| Alternator Input Frequency | 50 - 60 Hz at rated engine speed. (Minimum 75V AC) |
| Overspeed: nominal frequency +14% (+24% Overshoot) | |
| Start Output | SolidState 1.2A negative grounding terminal |
| Run Output | SolidState 1.2A negative grounding terminal |
| Pre-heat Output | Solid State1.2A negative grounding terminal |
| Operating Temperature Range | -30 to +70°C |
