New Hot 12100-F DC 10V-50V / 0.01-5000W/ 100A Programmable Reversible DC

Motor Speed Controller Governor Soft Start Foot Pedal

Notice : when the parcel arrived to your customs  ,please pay the           

            tax and pick up the parcel  ,we are not responsible for            

            any customs duty or import tax  


              if your place is remote ,then need to pay 35usd .

Picture showing :

Specification:

Product Name: PWM motor controller
Voltage: DC 10V-50V
Control power: 0.01-5000W
Maximum current: 100A
Size: 10 * 20 * 10CM
Weight: 1.0KG
Volume: 0.4KG

Feature:
1.High current, the maximum current up to 100A, continuous operating current up to 60A.
2.Forward and reverse control of the motor, double relay control, can withstand greater current.
3.Programmable, to meet the follow-up function expansion.
4.Soft start, reduce the moment of the current shock.
5.Power brake, more secure.
6.Foot control motor speed, more flexible.

Technical indicators:
(1) Operating voltage: DC 10V-50V Wide operating voltage range
(2) Control power: 0.01-5000W (maximum current: 100A, maximum rated current 60A)

Different operating voltage corresponding to different control power as follows:
Operating voltage 12V 12V * 100A = 1200W
Operating voltage 24V 24V * 100A = 2400W
Operating voltage 36V 30V * 100A = 3000W
Operating voltage 48V 48V * 100A = 4800W
(3) Quiescent current: 0.04A (operating voltage in the DC10V to DC30V when the quiescent current

will not exceed 40ma)
(4) PWM duty cycle: 0% -100%
(5) PWM frequency: 15khz
(6) Operating temperature: -20 - 40 (ambient temperature minus 20 degrees to zero 40 degrees)

The governor for the industrial grade quality, can be less than zero in the environment to stabilize the work,

the general commercial grade quality governor Is it possible to work stably below zero.
(7) Overall dimensions: length 145mm, width 78mm, height 38mm (not including the adjustment part

of the potentiometer)

Instructions:
Pedal control motor speed to achieve acceleration and deceleration.
Pedal release, motor power, then the motor does not brake.
The controller has two switches that control the power and motor steering respectively.
Power switch off, motor brake.
Two switches can be achieved by a combination of three-speed six-legged rocker switches to achieve

positive-stop-counter control.
 

Note: the pedal comes without the fix screw.