| Model Number: | 1762-IR4 |
|---|---|
| Motor Type: | other |
| Unit Type: | piece |
| Package Size: | 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in) |
| Package Weight: | 0.5kg (1.10lb.) |
Quick Details
Specifications
1762-IR4 PLC New Original 4 input channels Specialty I/O Module
1762 MicroLogix Expansion I/O
The 1762 MicroLogix expansion I/O modules are compatible with MicroLogix 1100, MicroLogix 1200, and MicroLogix 1400 controllers. If your application requires more I/O than the built-in I/O provided by the controller, add expansion I/O modules.
Install the expansion I/O modules to the right of the controller, either on a panel with two mounting screws or on a DIN rail. You can use digital and analog I/O modules in many combinations, up to the maximum supported by the controller. The current loading capacity of the controller’s built-in power supply may limit the actual number of I/O modules that can be connected to the controller.
Features
- Integrated high-performance I/O bus
- Software keying to prevent incorrect positioning within the system
- Finger-safe terminal blocks for I/O wiring
- Label to record I/O terminal designations
- Network support includes EtherNet/IP, DeviceNet, and DH-485 (local only)
- Digital, analog, and specialty I/O modules available
Specialty I/O Modules
| Cat. No. |
Inputs/Outputs |
Accepted Inputs |
Bus Current Load, Max. |
Accuracy at 25 °C (77 °F)* |
Resolution Across Full Range |
Channel Update Time (Typical) |
| 1762-IR4 |
4 input channels |
• RTDs: Platinum (385 and 3916), Copper (426), Nickel (672 and 618), Nickel-Iron (518) |
40 mA at 5V DC |
With autocalibration enabled |
Input filter and configuration dependent |
6…303 ms per enabled channel, depending on filter selection |
| 1762-IT4 |
4 input channels plus a CJC sensor |
• Thermocouple Types: |
40 mA at 5V DC |
±1.3 °C (±2.34 °F) |
15 bits plus sign |
7…303 ms per enabled channel +CJC update time |
| Includes offset, gain, non-linearity, and repeatability error terms. |
||||||