| Model Number: | MACH3 Breakout Board |
|---|---|
| Brand Name: | G-PENNY MACHINE |
| Motor Type: | Stepper Motor |
| Color: | Blue |
| Port: | USB and Parallel port |
| Software: | MACH2, MACH3, EMC2, KCAM4 |
| Working Voltage: | 5V DC |
| Axis: | 5 Axis |
| Material: | PCB |
| Unit Type: | piece |
| Package Size: | 15cm x 10cm x 8cm (5.91in x 3.94in x 3.15in) |
| Package Weight: | 0.45kg (0.99lb.) |
Quick Details
Specifications
1 PCS x 5 Axis MACH3 Breakout Board
1 PCS x USB Cable
1 PCS x 25 Pin Parallel Cable
Description:
-
It can most connection 5pcs driver and control 5pcs motor in the same time
-
It is with 4-wire limit switch to insure our safty movement
-
It is with relay port to contro the cnc spindle
-
Working voltage is 5VDC and support with MACH3,EMC2,KCAM4 software
-
Size:9x5.7cm
Wiring Diagram:
25-pin parallel port control is defined as follows:
| DB25 control pin (PIN) | The pin of the drive board |
Comment
|
| 1 | STEPB | B(Fifth axis)pulse signal |
| 2 | STEPX | X(First axis) pulse signal |
| 3 | DIRX | X(First axis) direction of the signal |
| 4 | STEPY | Y(Secondaxis)pulse signal |
| 5 | DIRY | Y(Second axis)direction of the signal |
| 6 | STEPZ | Z(Third axis) pulse signal |
| 7 | DIRZ | Z(Third axis) direction of the signal |
| 8 | STEPA | A(Fourth axis) pulse signal |
| 9 | DIRA | A(Fourth axis) direction of the signal |
| 10 | LIMIT-1 | Limit input interface 1 |
| 11 | LIMIT-2 | Limit input interface 2 |
| 12 | LIMIT-3 | Limit input interface 3 |
| 13 | LIMIT-4 | Limit input interface 4 |
| 14 | DIRB | B(Fifth axis) direction of the signal |
| 15 | Vacant |
|
| 16 | RLY | Relay control |
| 17 | EN | All axis enable |
| 18-25 | GND | GND |
Remark:This 5 axis breakout board can connction with many driver type as a CNC 3/4/5 axis driver controller kit,pls if you intresting pls contact us!
Shipping terms
Our products are sold worldwide.
But if your country is more difficult to transport goods, please contact us in advance to confirm shipping cost.
Payment
We accept paypal credit, bank transfer, western union etc.
Payment must be made within 7days calendar days of the auction end time.
Problems And Feedback
PLEASE DON'T leave any negative feedback before you contact us.
Please give us the opportunity to resolve any problem,we will try our best to help you.
Your satisfaction is very important for our store, so please contact us before you want to leave a negative feedback.
Thanks very much in advance.
Refund
If you are not satisfied with our package like the products is damage,
please do not sign it and contact us immediately.
If it is possible, please take some photos or make a small video about it. It will help us to solve the problems.
Note
We can produce the product according to our customer's design.
If you need something is very special, please contact us about it.
We are willing to help you about it.