| Brand Name: | BRINGSMART |
|---|---|
| Motor Type: | Stepper Motor |
| Model Number: | BE-1105 |
| Unit Type: | piece |
| Package Size: | 13cm x 9cm x 6cm (5.12in x 3.54in x 2.36in) |
| Package Weight: | 0.11kg (0.24lb.) |
Quick Details
Specifications
Wholesale 1pcs Stepper Motor Controller Pulse Servo Governor Uniaxial BE-1105
1. High-performance, high-speed 32-bit MCU
2. The opto-isolated output motion control signal Maximum current 100mA (signal output: + 5V-24V pulse + direction)
3. dedicated normally closed limit-negative, optical isolation + 5 ~ 24V signal input port
4. Support PC software operation command loading, 485, serial communication.
5. The minimum data unit: 0.001mm
6. Fast movement speed: 4450mm / min (when the pulse equivalent 0.001mm time)
7. The maximum processing speed limit: 4450mm / min (when the pulse equivalent 0.001mm time)
8. The maximum pulse output frequency: 74KHz (output pulse resolution of less than 1Hz)
9. Position control largest travel 174 meters (when the pulse equivalent 0.001mm time)
10. Control axes: 1 axis
11. System main functions: seven kinds of control mode, speed control, position control, acceleration and deceleration control
12. The peripheral mode selector switch. (Stop state mode switch LED flashes when you press the corresponding number of the following modes)
13. The peripheral speed increase, deceleration button. (Corresponding to the operating state when pressed simultaneously when the mode switch and is running, or add negative run switching speed and deceleration, long press is also effective)
14. A variety of functions, computer settings is simple, line control, functional and practical, volume 5 8.2CM
15. The bus set associative support: the maximum number of units to 255 units, the total length of no more than 1200 meters, support the modification of the control number address.
