because the CD cannot pass through the customs
please download this software for winxp 32bit, win7 32bit
https://www.dropbox.com/s/sv6frfcrqraukc5/english-GX%20Developer-8.50C-E.zip?dl=0
please download this software for win7 64bit
https://www.dropbox.com/s/01kcdn5zhwnft4e/GX%20Works2%20PLC.RAR?dl=0
https://www.dropbox.com/s/yxo9fvae69at34t/GX_Works2.1405653290F.zip?dl=0

The first line fill your name to the blank
the second line fill your company name to the blank
the third line fill the serial number to the blank:570-986818410

ad0-->D8030
ad1-->D8031
ad2-->D8032
ad3-->D8033

Voltage=D803n(n=0~8)XVrf/4095 , Vrf=3.3V

Specifications:

Compatiable Fx2N series PLC

the power supply is DC24V

This board use industrial grade 32-bit STM32CPU,it is  powerful, faster, more stable performance, special encryption make PLC that can not be cracked.

Ladder diagram computer programming is flexible and convenient for you, support Modbus protocol (note: it only serial  RS232 ports, no RS485 interface), and human-computer interface (touch screen text display) supporting the use of Confidential performance is good, the inside of the programming function cannot be copied, protect your work achievement.

(1). RS no agreement communication (mitsubishi basic),
(2). Modbus RTU master-slave protocol (convenient support temperature control meter, frequency converter communication),
(3). Modbus ASCII master-slave agreement.

Support A/B phase high speed counting input, support Y0 Y1, high speed output (transistor), support and deceleration, with absolute positioning relative positioning.

Don't need software conversion, direct download monitoring and normal PLC as download mode
Can directly use mitsubishi programming software GX Developer or GX Works2 programming, download, debugging and monitoring.

Instruction descriptions:

Write Program, parameters, comments
Read Program, parameters, comments
Check Program, parameters, comments
Computer monitoring function (convenient debugging)
Soft element batch function
Soft element landing function
Soft element test function
Clear memory function
Connection text HMI function (baud rate 9600, data bit 7, parity bit, even parity check (even), stop bit 1)
Connection touch screen Display function (baud rate 9600, data bit 7, parity bit, even parity check (even), stop bit 1)
Data retention during power-down  function

Supports command sets special soft element:
M8000 (operation monitoring contactoror), M8001 (operation monitoring back contactoror).
M8002 (initialization pulse contactor), M8003 (initialization pulse reverse contactor).
M8004 (error indication contactor).
M8011 (10 milliseconds clock pulse), M8012 (100 milliseconds clock pulse), M8013 (1 seconds the clock pulse), M8014 (1 time sharing the clock pulse).
M8020 (zero mark), M8021 (borrow mark), M8022 (carry flag).
M8029 (instruction execution end mark).
M8033 (memory keep contactor).
M8034 (banned output contactor).
More reference FX1N series.

Basic instruction:

LD, LDI, AND, ANI, OR, ORI, OUT, (OUTT, OUTC), SET, RST, ANB, ORB, MPS, MRD.
MPP, INV, the LDP, LDF, ANDP, ANDF, ORP, ORF, RET, OUTM, SETM, RSTM, OUTS, SETS,
RSTS, PLS, PLF, MC, MCR, PI, END

Step-by-step instruction:

STL: support maximum 8 road parallel branch, different state number can have a double coil.
contactor compare instruction:

LD > =, LD < =, LD >, LD < < >, LD, LD =, AND > =, AND < =, AND >, AND < < >, AND, AND, OR AND = > =, OR < =, OR >, < > OR < AND, OR, OR =.
Transfer and compare instruction:

MOV, CML, XCH, BCD, BIN, CMP, ZCP, FMOV. SMOV. BMOV.
Arithmetic instruction:

ADD, SUB, MUL, DIV, INC, DEC, WAND, WOR, WXOR, NEG.
Cyclic shift instruction:

SFTR, SFTL, SFWR, SFRD.
Data processing instruction:

ZRST, DECO, ENCO.
Program flow instruction:

CJ, CALL, SRET, IRET, EI, DI, FEND, WDT, FOR, NEXT.
Convenient instruction:

IST, ABSD, INCD, ALT, RAMP,
High speed processing instruction:

REF, REFF, MTR, HSCS, HSCR, SPD, PLSY, PWM, PLSR (two way pulse output, Y0 Y1, mouth).
Peripheral equipment I/O port:

DSW, SEGL, FROM, TO.
Peripheral equipment SER instruction:

RS, PRUN, ASCI, HEX, CCD, VRRD, VRSC, PID.
Positioning instruction:

ABS, ZRN, PLSV, DRVI, DRVA.
Clock operation:

TCMP, TZCP, TADD, TSUB, TRD, TWR, HOUR.

Support 32-bit instruction!
Soft element power-down Data retention, application refers to this and mitsubishi FX1N compatible,
At present only two instructions does not be supported (HSCS, HSCR)

Special soft element:
M8000 (operation monitoring contactor), M8001 (operation monitoring back contactor).
M8002 (initialization pulse contactor), M8003 (initialization pulse reverse contactor)
M8004 (error indication contactor).
M8011 (10 milliseconds clock pulse), M8012 (100 milliseconds clock pulse), M8013 (1 seconds the clock pulse), M8014 (1 time sharing the clock pulse).
M8020 (zero mark), M8021 (borrow mark), M8022 (carry flag).
M8029 (instruction execution end mark).
M8033 (memory keep contactor).
M8034 (banned output contactor).
M8200 - M8203 (C200 - C203 count direction).
M8235 (C235 count direction).
D8000 (monitoring timer setting).
D8012 (maximum scanning time).
D8140 (Y0 pulse output count register)
D8142 (Y1 pulse output count register)
Maximum memory capacity: 8000 steps.

because the CD cannot pass through the customs please download this software for winxp 32bit, win7 32bit https://www.dropbox.com/s/sv6frfcrqraukc5/english-GX%20Developer-8.50C-E.zip?dl=0 please download this software for win7 64bit https://www.dropbox.com/s/01kcdn5zhwnft4e/GX%20Works2%20PLC.RAR?dl=0 https://www.dropbox.com/s/yxo9fvae69at34t/GX_Works2.1405653290F.zip?dl=0

If you have any problem,please contact with us.

 

****************************************************************
Customer Satisfaction